Priemerná denná cena
Sumy v mene USD

Popis
Robotis - Dynamixel AX-12W The AX-12W is a variant of the popular AX-12A servo with modified gear reduction to offer high speed in Wheel Mode (continuous rotation mode). (in Joint mode the actual moving speed is close to the AX-12A) The AX series of servos can be connected in a daisy chain, and controlled over a Serial protocol meaning several servos can be connected to each other in a chain and offer several compliance and sensing parameters including position, velocity and temperature. The AX-12W has the same exterior size and shape as the AX-12A and the AX-18A using the same communication interface and protocol. This means that all these Servo models can be mixed and matched to meet the specific demands of Robotic applications. AX-12A vs. AX-12W speed comparison in Wheel ModeThis high speed comes at the expense of a lower holding torque: the AX-12W has a 2kgf.cm torque versus the 12kgf.cm offered by the AX-12A. Hardware Specifications Weight : 52.9 Dimension : 32mm x 50mm x 40mm Minimum Control Angle : 0.29° X 1,024 Gear Ratio : 254 :1 Stall Torque : 2 kgf.cm (at 12V, 1.4A) No load speed : 470rpm (at 12V, wheel mode), 54rpm (at 12 V, joint mode) Operating Temperature : -5C ~ +70C Operating Voltage : 9V~12V (Recommended Voltage 11.1V) Protocol Type : Half duplex Asynchronous Serial Communication (8bit, 1stop, No Parity) Link (Physical) : TTL Level Multi Drop (Daisy Chain Type Connector) Package Contents: AX-12W: 1 AX-HORN: 1 set (pre-equipped) Horn Spacer: 1 BPF-WA/BU Set: 1 set FP04-F3: 1 set 3P Cable 200: 1 set Bolt PHS M2*6: 16 pcs Bolt BHS M3*10: 1 pc N1 Nut M2: 16 pcs Default Settings: ID: 1 Baud rate: 1 Mbps Serial Interface Half Duplex TTL interface * Please change the setting of ID and baud rate depending on your operating environment.
Robotis - Dynamixel AX-12W The AX-12W is a variant of the popular AX-12A servo with modified gear reduction to offer high speed in Wheel Mode (continuous rotation mode). (in Joint mode the actual moving speed is close to the AX-12A) The AX series of servos can be connected in a daisy chain, and controlled over a Serial protocol meaning several servos can be connected to each other in a chain and offer several compliance and sensing parameters including position, velocity and temperature. The AX-12W has the same exterior size and shape as the AX-12A and the AX-18A using the same communication interface and protocol. This means that all these Servo models can be mixed and matched to meet the specific demands of Robotic applications. AX-12A vs. AX-12W speed comparison in Wheel ModeThis high speed comes at the expense of a lower holding torque: the AX-12W has a 2kgf.cm torque versus the 12kgf.cm offered by the AX-12A. Hardware Specifications Weight : 52.9 Dimension : 32mm x 50mm x 40mm Minimum Control Angle : 0.29° X 1,024 Gear Ratio : 254 :1 Stall Torque : 2 kgf.cm (at 12V, 1.4A) No load speed : 470rpm (at 12V, wheel mode), 54rpm (at 12 V, joint mode) Operating Temperature : -5C ~ +70C Operating Voltage : 9V~12V (Recommended Voltage 11.1V) Protocol Type : Half duplex Asynchronous Serial Communication (8bit, 1stop, No Parity) Link (Physical) : TTL Level Multi Drop (Daisy Chain Type Connector) Package Contents: AX-12W: 1 AX-HORN: 1 set (pre-equipped) Horn Spacer: 1 BPF-WA/BU Set: 1 set FP04-F3: 1 set 3P Cable 200: 1 set Bolt PHS M2*6: 16 pcs Bolt BHS M3*10: 1 pc N1 Nut M2: 16 pcs Default Settings: ID: 1 Baud rate: 1 Mbps Serial Interface Half Duplex TTL interface * Please change the setting of ID and baud rate depending on your operating environment.
História cien
Jeden údaj za deň, spriemerovaný podľa dátumu pozorovania.
Sumy v mene USD
Priemery sa počítajú za každý deň UTC zo všetkých zaznamenaných cien ponúk.
🍪 Predvoľby súborov cookie
Súbory cookie používame na meranie výkonu. Zásady ochrany súkromia