Harga rata-rata harian
Jumlah dalam USD
Deskripsi
Features DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module. The DYNAMIXEL 2XL series can control two axis with a single module, so it can be effectively applied to robot`s neck, shoulder, hip, wrist, and ankle.The 2XL series adopts new features that allow 360 degrees control mode with its contactless magnetic encoder and hollow back case assembly structure and Metal gear (Powder Metallurgy) is used for high durability. High compatibility with XL430, XM430, XH430. 1. Various Operating Modes Velocity Control, Position Control, Extended Position Control, PWM Control 2. Profile Control for Smooth Motion Planning 3. Hollow Back Case Minimizes Cable Stress 4. Direct Screw Assembly to the Case (Some parts) 5. Energy Saving with Reduced Current Package Components 1 - 2XL430-W250-T 1 - Robot Cable-X3P 180mm 10 - Bolt M2.5x5 10 - Bolt M2x5 * Idler Set(HN11-I101 Set) for assembling hinge frames are not included. Compatible Products Controller : OpenCM9.04 485 Expansion Board, OpenCR1.0, CM-550 Interface : USB2Dynamixel, U2D2 Factory Default Settings ID(A) : 1 ID(B) : 2 Baud Rate : 57600bps (User can change various settings including ID and baud rate according to the environment) Various Cabling Methods Performance Comparison Cautions DYNAMIXEL-X Series cable assembly through hollow case Organize the entangled cable before assembling the back case. Do not assemble the back case with entangled cable. The entangled cable can be squashed by the case and cause communication error. The DYNAMIXEL-X Series adopted a new gold-plated JST connector for secure and reliable communication. The connector used for previous Dynamixel is Molex. Molex-JST conversion cable is not included with the purchase of 2XL430 Dynamixel, so you must purchase Molex-JST conversion cable separately to connect to the existing controller (OpenCM 485 expansion board, USB2Dynamixel). Specification Model Name 2XL430-W250-T MCU Cortex-M3 (72 [Mhz], 32 [bit]) Input Voltage Min. [V] - 6.5Recommended [V] - 11.1Max. [V] - 12.0 Performance Characteristics Voltage [V] - 11.1 Stall Torque [N·m] - 1.40 Stall Current [A] - 1.3 No Load Speed [rpm] - 57.0 No Load Current [A] - 0.05 Resolution Resolution [deg/pulse] - 0.0879 Step [pulse] - 4,096 Angle [degree] - 360 Position Sensor Contactless absolute encoder (12Bit, 360 [deg]) Maker - ams(www.ams.com), Part No : AS5601 Op
Features DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module. The DYNAMIXEL 2XL series can control two axis with a single module, so it can be effectively applied to robot`s neck, shoulder, hip, wrist, and ankle.The 2XL series adopts new features that allow 360 degrees control mode with its contactless magnetic encoder and hollow back case assembly structure and Metal gear (Powder Metallurgy) is used for high durability. High compatibility with XL430, XM430, XH430. 1. Various Operating Modes Velocity Control, Position Control, Extended Position Control, PWM Control 2. Profile Control for Smooth Motion Planning 3. Hollow Back Case Minimizes Cable Stress 4. Direct Screw Assembly to the Case (Some parts) 5. Energy Saving with Reduced Current Package Components 1 - 2XL430-W250-T 1 - Robot Cable-X3P 180mm 10 - Bolt M2.5x5 10 - Bolt M2x5 * Idler Set(HN11-I101 Set) for assembling hinge frames are not included. Compatible Products Controller : OpenCM9.04 485 Expansion Board, OpenCR1.0, CM-550 Interface : USB2Dynamixel, U2D2 Factory Default Settings ID(A) : 1 ID(B) : 2 Baud Rate : 57600bps (User can change various settings including ID and baud rate according to the environment) Various Cabling Methods Performance Comparison Cautions DYNAMIXEL-X Series cable assembly through hollow case Organize the entangled cable before assembling the back case. Do not assemble the back case with entangled cable. The entangled cable can be squashed by the case and cause communication error. The DYNAMIXEL-X Series adopted a new gold-plated JST connector for secure and reliable communication. The connector used for previous Dynamixel is Molex. Molex-JST conversion cable is not included with the purchase of 2XL430 Dynamixel, so you must purchase Molex-JST conversion cable separately to connect to the existing controller (OpenCM 485 expansion board, USB2Dynamixel). Specification Model Name 2XL430-W250-T MCU Cortex-M3 (72 [Mhz], 32 [bit]) Input Voltage Min. [V] - 6.5Recommended [V] - 11.1Max. [V] - 12.0 Performance Characteristics Voltage [V] - 11.1 Stall Torque [N·m] - 1.40 Stall Current [A] - 1.3 No Load Speed [rpm] - 57.0 No Load Current [A] - 0.05 Resolution Resolution [deg/pulse] - 0.0879 Step [pulse] - 4,096 Angle [degree] - 360 Position Sensor Contactless absolute encoder (12Bit, 360 [deg]) Maker - ams(www.ams.com), Part No : AS5601 Op
Riwayat harga
Riwayat harga rata-rata
Satu titik data per hari, dirata-ratakan berdasarkan tanggal pengamatan.
$132,67
Rata-rata dihitung per hari UTC dari semua harga penawaran yang tercatat.
Listing Terkait
DYNAMIXEL 2XL430-W250-T
Robotis
$149,39
Dynamixel 2-Axis Actuator 2XL430-W250-T
Robotis
152,16 €
Dynamixel XC330-M181-T Servo - 902-0172-000
Robotis
110,40 €
Dynamixel XC330-M288-T Servo - 902-0173-000
Robotis
110,40 €
Dynamixel XC330-T181-T Servo - 902-0170-000
Robotis
110,40 €
Dynamixel XC330-T288-T Servo - 902-0171-000
Robotis
110,40 €
Dynamixel XC430-W150-T
Robotis
£92,82
ROBOTIS DREAM Ⅱ Level 1 Kit
Robotis
£97,33
ROBOTIS DREAM Ⅱ Level 2 Kit
Robotis
£97,33
ROBOTIS DREAM Ⅱ Level 3 Kit
Robotis
£97,33
ROBOTIS DREAM Ⅱ Level 4 Kit
Robotis
£97,33
ROBOTIS DREAM Ⅱ Level 5 Kit
Robotis
£97,33