Dnevna prosječna cijena
Iznosi u valuti USD
Opis
Features DYNAMIXEL XW series are ROBOTIS’ first line of IP Level models, featuring a certified IP68 (1m, 24hr) rating and are designed for use in wet environments, underwater, and any outdoor applications where a sealed servo is necessary. * XW series come with separate waterproof cable and extension cable. 1. 6 Operating Modes (Torque Control, Velocity Control, Position Control, Extended Position Control, Current based Position Control, PWM Control) 2. Profile Control for Smooth Motion Planning 3. Improved Heat Sink Featuring an Aluminum Case 4. Direct Screw Assembly to the Case (without Nut Insert) 5. Energy Saving (Reduced Current from 100mA to 40mA) 6. 31% reduced volume compared to the MX-28 Certified Ingress Protection Package Components Item Quantity Description XW430-T200-R 1 DYNAMIXEL HN12-N105 1 Standard horn for XW430 models Robot Cable-WP 1000mm 1 Waterproof cable Robot Cable-WP 1000mm(Extension) 1 Waterproof cable(extension) Wrench Bolt WB M2.5x4 16 For frame assembly(Side hole) Wrench Bolt WB M2x4 10 For frame assembly Wrench Bolt WB M2.5x8 1 For horn assembly Compatible Products Controller : OpenCM9.04 485 Expansion Board, OpenCR1.0 Interface : USB2Dynamixel, U2D2 Factory Default Settings ID : 1 Baud Rate : 57600bps (User can change various settings including ID and baud rate according to environment) Waterproof Cabling Performance Comparison Caution DYNAMIXEL XW series uses a waterproof cable. One side has a waterproof connector and the other side has a JST connector. Extension cable has waterproof connectors for both sides. Comply with the operating environment. (Depth 1 m, 24 hr in normal fresh water) Do not pull the rubber cap of the connector. The rubber cap is connected to the rubber packing, and any deformation may cause leakage. The rubber cap is designed for dust protection and is not waterproof. When using underwater, please connect a waterproof cable. Do not insert blades or other sharp objects during product operation. The OpenCR controller has a JST connector for direct connection, but since the OpenCM9.04 + OpenCM 485 expansion board only has a Molex connector, a conversion cable must be used by utilizing U2D2 PHB. Link e-Manual Drawing Software Compatibility Guide Selection Guide DYNAMIXEL SDK
Features DYNAMIXEL XW series are ROBOTIS’ first line of IP Level models, featuring a certified IP68 (1m, 24hr) rating and are designed for use in wet environments, underwater, and any outdoor applications where a sealed servo is necessary. * XW series come with separate waterproof cable and extension cable. 1. 6 Operating Modes (Torque Control, Velocity Control, Position Control, Extended Position Control, Current based Position Control, PWM Control) 2. Profile Control for Smooth Motion Planning 3. Improved Heat Sink Featuring an Aluminum Case 4. Direct Screw Assembly to the Case (without Nut Insert) 5. Energy Saving (Reduced Current from 100mA to 40mA) 6. 31% reduced volume compared to the MX-28 Certified Ingress Protection Package Components Item Quantity Description XW430-T200-R 1 DYNAMIXEL HN12-N105 1 Standard horn for XW430 models Robot Cable-WP 1000mm 1 Waterproof cable Robot Cable-WP 1000mm(Extension) 1 Waterproof cable(extension) Wrench Bolt WB M2.5x4 16 For frame assembly(Side hole) Wrench Bolt WB M2x4 10 For frame assembly Wrench Bolt WB M2.5x8 1 For horn assembly Compatible Products Controller : OpenCM9.04 485 Expansion Board, OpenCR1.0 Interface : USB2Dynamixel, U2D2 Factory Default Settings ID : 1 Baud Rate : 57600bps (User can change various settings including ID and baud rate according to environment) Waterproof Cabling Performance Comparison Caution DYNAMIXEL XW series uses a waterproof cable. One side has a waterproof connector and the other side has a JST connector. Extension cable has waterproof connectors for both sides. Comply with the operating environment. (Depth 1 m, 24 hr in normal fresh water) Do not pull the rubber cap of the connector. The rubber cap is connected to the rubber packing, and any deformation may cause leakage. The rubber cap is designed for dust protection and is not waterproof. When using underwater, please connect a waterproof cable. Do not insert blades or other sharp objects during product operation. The OpenCR controller has a JST connector for direct connection, but since the OpenCM9.04 + OpenCM 485 expansion board only has a Molex connector, a conversion cable must be used by utilizing U2D2 PHB. Link e-Manual Drawing Software Compatibility Guide Selection Guide DYNAMIXEL SDK
Povijest cijena
Kretanje prosječne cijene
Jedna podatkovna točka po danu, izračunata prema datumu bilježenja.
$785,39
Prosjeci se izračunavaju za svaki dan prema UTC-u, na temelju svih zabilježenih cijena ponuda.
Povezani oglasi
DYNAMIXEL XW430-T200-R
Robotis
$885,39
Dynamixel Waterproof XW430-T200-R Servo
Robotis
945,42 €
902-0044-001 Pack of 6 Dynamixel AX-18A Servos
Robotis
619,14 €
Dynamixel XH540-W150-R Servo
Robotis
642,12 €
Dynamixel XH540-W150-T Servo
Robotis
627,96 €
Dynamixel XH540-W270-R Servo
Robotis
642,06 €
Dynamixel XH540-W270-T Servo
Robotis
627,96 €
Robotis - Dynamixel XD540-T150-R Servo
Robotis
£595,84
Robotis - Dynamixel XD540-T270-R Servo
Robotis
£595,84
Robotis - Dynamixel XW430-T333-R
Robotis
£594,57
DYNAMIXEL XH540-W270-R
Robotis
$632,39
DYNAMIXEL XH540-W150-R
Robotis
$632,39