The PSYONIC Ability Hand is a human-scale dexterous robotic hand with six degrees of freedom across five fingers: the index, middle, ring and little fingers each move independently, and the thumb has two degrees of freedom. It weighs about 440 to 470 g depending on size and is made for manipulation research, prosthetics research, human-robot interaction and use as an end effector on a robotic arm.
PSYONIC gives it a power grasp of about 78 N, a pinch force of about 8 N and a key grip of about 17 N, with a 100 lb axial load capacity. Each finger carries six tactile sensing channels, 30 force-sensitive resistor channels in all, alongside six encoder channels, so grasp experiments can read touch as well as position.
The hand connects over BLE, I2C, UART or 5 V RS-485 and runs from a 6 to 12 V supply. Position, velocity, torque/current and voltage control run at up to about 1 kHz, and PSYONIC provides Python, C++ and ROS 2 resources, an API for its six brushless DC motors and sensor streams, CAD models in .STEP and .STL, URDF files and simulation assets for robotic-arm workflows.
It comes as a left or right hand in a large (about 186 × 85 mm) or small (about 180 × 85 mm) size, with a 34.9 mm wrist diameter, and the version you need is confirmed with your order. PSYONIC gives a two-year limited warranty; the index, middle, ring and little finger modules can be replaced in the field, and thumb and internal repairs go back to PSYONIC. PSYONIC classifies the hand as EAR99 for export and sells it worldwide as a research device, with commercial and industrial use in the United States.
Key Capabilities
-
Six Degrees of Freedom: Four independently actuated fingers and a two-axis thumb give six degrees of freedom across five digits.
-
Touch on Every Finger: Six tactile channels per digit, 30 force-sensitive resistor channels in all, report contact alongside six encoder channels.
-
Measured Grip Forces: PSYONIC gives a power grasp of about 78 N, a pinch of about 8 N and a key grip of about 17 N.
-
Light for a Human-Scale Hand: The hand weighs about 440 to 470 g depending on size and carries a 100 lb axial load.
-
Four Interfaces, Four Control Modes: BLE, I2C, UART and 5 V RS-485 connect it, and position, velocity, torque/current and voltage control run at up to about 1 kHz.
-
Python, C++ and ROS 2: PSYONIC provides an API and software resources for all three, with CAD, URDF and simulation assets.
-
Field-Replaceable Fingers: The index, middle, ring and little finger modules can be replaced in the field.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.