New

Ouster Cables with Interface Box

Name: Ouster Cables with Interface Box
Brand: Ouster
SKU: 76c42d4c-3d0e-4bcf-a5e9-42b3af03113e
Price: 300 EUR
Availability: InStock

Ouster | A-000000-08435

€300.00 VAT incl. €250.00 VAT excl.

Ouster cables with Interface Box make it possible to connect an Ouster LiDAR sensor to a power supply and an Ethernet network for configuration, evaluation and integration.

Quantity

Delivery within 4 weeks

Ask for a quote

Create a cart and turn it into a quote instantly!

Payment methods (see T&C)

Key features of Ouster cables with Interface Box

Direct connection between the Ouster sensor and the Interface Box
Gigabit Ethernet RJ45 port for communication with the sensor
DC power input on the Interface Box
Available in 1 m, 5 m, 10 m and 15 m
5 m version with right-angle connector for installations with limited space behind the sensor
Cable suitable for transmitting power, Ethernet data and I/O signals
Particularly suitable for testing, prototyping and laboratory development

Several lengths to suit your installation

Ouster cables with Interface Box are available in several lengths to suit the layout of the LiDAR system and the distance between the sensor and the computing equipment.

Variant	Configuration
1 m	Straight connector + Interface Box
5 m	Right-angle connector + Interface Box
10 m	Straight connector + Interface Box
15 m	Straight connector + Interface Box

Right-angle version for space-constrained installations

The 5 m variant uses a right-angle connector on the sensor side. This format is particularly useful when the LiDAR is installed close to a wall, inside a chassis or in a space where the cable cannot exit directly in line with the connector.

Ouster recommends using a right-angle connector when the cable needs to be bent within the first few centimeters after the connector, in order to reduce mechanical stress on the connector.

Interface Box for power and Ethernet communication

The Ouster Interface Box simplifies LiDAR connection during development and testing. It provides access to a 1000BASE-T Gigabit Ethernet interface via RJ45 as well as the sensor power supply.

It also provides access to the signals required for certain sensor synchronization and integration functions.

The Interface Box is primarily intended for clean, protected indoor environments. It is not designed for direct exposure to water, dust or unprotected outdoor conditions.