متوسط السعر اليومي
المبالغ بعملة USD
الوصف
This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors terminated with 150mm cables and 3-pin female servo headers. These wheel encoders require a supply voltage of 3-24V with a supply current of 4mA.Features:Supply Voltage: 3-24VSupply Current: 4mA per sensorOutput Voltage: 26V MaxOutput Current: 25mA ContinuousDocuments:DatasheetRedBot Assembly Guide
This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors terminated with 150mm cables and 3-pin female servo headers. These wheel encoders require a supply voltage of 3-24V with a supply current of 4mA.Features:Supply Voltage: 3-24VSupply Current: 4mA per sensorOutput Voltage: 26V MaxOutput Current: 25mA ContinuousDocuments:DatasheetRedBot Assembly Guide
سجل الأسعار
سجل متوسط الأسعار
نقطة بيانات واحدة لكل يوم، محسوبة بمتوسط الأسعار المرصودة في ذلك اليوم.
$13.80
تُحسب المتوسطات لكل يوم وفق التوقيت العالمي المنسق، استنادًا إلى أسعار جميع العروض المسجلة.
الإدراجات ذات الصلة
BIOLOID Skin FP04-F56/F57/F58/F59 Set
RoboSavvy
£11.08
Micro Gearmotor - 110 RPM (6-12V)
RoboSavvy
£10.17
Micro Gearmotor - 2600 RPM (6-12V)
RoboSavvy
£10.17
Micro Gearmotor - 4900 RPM (6-12V)
RoboSavvy
£10.17
Robot Cable-3P 60mm 10pcs
RoboSavvy
£10.25
Servo - Generic, 180° Rotation (Sub-Micro Size)
RoboSavvy
£9.70
Servo - Generic (Sub-Micro Size)
RoboSavvy
£9.70
Small Stepper Motor - 100 g.cm (48 steps/rev, 100mm Wire)
RoboSavvy
£11.12
SparkFun Mini Stepper Motor Driver - TC78H670FTG
RoboSavvy
£9.52
Standard Gripper Kit A - Channel Mount
RoboSavvy
£9.58
Standard Gripper Kit B - Straight Mount
RoboSavvy
£9.58
2S/3S LIPO Battery Charger LBC-10
RoboSavvy
£12.25