hình người

Noetix N2 — Thông số, Giá & Nơi mua (2026)

The Noetix N2 is a humanoid robot platform by Noetix Robotics, USA, currently in development. Price: estimated ~$5,500 USD. Key specs: 118 cm tall, 29 kg weight; degrees of freedom, battery life, and top speed are not publicly disclosed. The N2 is designed for education, research, consumer interaction, and competitive robotics. No official release date; not yet commercially available.

💰Giá
$5.500
📅Chế tạo lần đầu
2024
🌍Xuất xứ
US
📏Chiều cao
118 cm
⚖️Trọng lượng
29 kg
🦾Bậc tự do
Not published
🏃Tốc độ tối đa
Not published
📦Tải trọng
Not published
🔋Pin
Not published
🛒Tính sẵn có
Không có sẵn

What is the N2 Noetix?

The Noetix N2 is a humanoid robot under development by Noetix Robotics, a U.S. company. Designed for navigation in human environments, it serves as a mobile platform for education, research, and competitive demonstrations. The N2 gained public attention by placing second in the world’s first humanoid half-marathon in April 2025, completing 21 km in 3 hours 37 minutes—demonstrating endurance even without published peak speed. Standing 118 cm tall and weighing 29 kg, it fills a mid-sized humanoid niche, likely targeting universities and robotics competitions. As of 2026, Noetix has not released full specifications or production plans, positioning the N2 as a developmental prototype rather than a commercially available product.

Specifications

Here are the full technical specifications.

SpecValue
Height118 cm
Weight29 kg
Degrees of freedomNot published
Battery lifeNot published
Max speedNot published
PayloadNot published
Price (new)~$5,500 (est.)
Price (used range)N/A (pre-commercial)

Price & Value

New MSRP: ~$5,500 (estimated)

Used range: N/A

A price of around $5,500 (cited in one third‑party article but not confirmed by Noetix) would make the N2 exceptionally affordable for a humanoid robot of this size, undercutting most research platforms by thousands of dollars. If Noetix brings the N2 to market at or near this figure, it could appeal to university labs and competition teams with limited budgets. However, because the robot is still in development, no official pricing, warranty, or support structure exists—prospective buyers should treat the $5,500 figure as tentative. Compared to humanoids like the Unitree G1 (~$16,000) or Robotis OP3 (~$12,000), the N2’s potential price is a strong value proposition, provided the final product ships with competitive endurance and motion capabilities. Realistic total cost of ownership remains unknown without software licensing or maintenance details. For now, the N2 represents a speculative value that will only crystallize with an official launch.

Who Is It For?

Best for: - University robotics labs (low‑cost platform for locomotion and human‑robot interaction research) - Competitive robotics teams (endurance events, half‑marathon demonstrations) - Education and STEM outreach (accessible humanoid for teaching programming and hardware) - Developer communities exploring low‑cost humanoid hardware for consumer applications

Not for: - Commercial deployment in factories or retail (no published reliability, certifications, or support infrastructure) - Heavy‑payload tasks (payload rating not disclosed, likely light‑duty) - Buyers needing immediate delivery (no release date or production timeline announced)

Alternatives & Comparison

The Noetix N2 sits among early‑stage, affordable humanoids that promise research utility. Two ready‑to‑buy competitors illustrate the trade‑offs between proven, available platforms and a potential low‑cost disruptor still in development.

ModelPriceAvailableKey Difference
Unitree G1~$16,000preorderHigher DOF (23) and published battery life (2 h) with manufacturer support, but nearly three times the estimated cost.
Robotis OP3~$12,000yesMature research platform with 20 DOF, extensive documentation and ROS integration, but smaller than N2.

Verdict: If you need a working humanoid today for serious research or education, the Robotis OP3 or Unitree G1 deliver proven performance and vendor backing. For teams willing to wait and take a chance on an unproven platform, the Noetix N2’s estimated sub‑$6,000 price could redefine value—if the robot eventually ships with robust specs and reliability.

Use Cases & Capabilities

Research & Development

The N2’s humanoid form factor and potential low price make it a candidate for labs studying bipedal locomotion, balance, and human‑robot interaction. Without published DOF or sensor suites, its research value hinges on future hardware specs, but the half‑marathon performance suggests stable walking and endurance. Universities could use multiple units for collaborative experiments without breaking budgets. Until official specifications emerge, early‑adopter researchers would need to verify integration with frameworks like ROS.

Competitive Robotics

The N2’s standout achievement is a second‑place finish in the world’s first humanoid half‑marathon, proving it can sustain 3.5‑plus hours of continuous walking at roughly 5.8 km/h. Teams entering robot marathons, obstacle courses, or endurance challenges will find this endurance compelling, even if the robot lacks published peak speed or arm dexterity. Its relatively compact size (118 cm) may also comply with event size restrictions. However, the lack of official payload or manipulation specs limits its readiness for tasks requiring object handling.

Education & STEM Outreach

If brought to market at an estimated $5,500, the N2 could become an accessible humanoid for high‑school and university robotics clubs. Its height and weight (29 kg) strike a balance between being visibly impressive and manageable in a classroom. Students could program basic navigation, gesture recognition, and voice interaction without requiring enterprise budgets. But until Noetix releases educational curricula, software development kits, or community support, early adopters would face a steep learning curve.

Consumer Companion Interaction

The N2 has been described as a platform for consumer and companion applications, potentially acting as a home assistant or interactive receptionist. Appearances alongside cultural events (Spring Festival Gala) hint at a design friendly for public engagement. With no on‑board manipulation payload confirmed, early use cases would focus on verbal communication, expressive movements, and navigation. Consumer‑grade safety certifications and noise levels remain unknown, so deployment in homes or crowded spaces would require careful engineering.

History & Background

Noetix Robotics is an emerging U.S. company that surfaced around 2024 with a family of humanoid robots: the N2, Hobbs, and Dora. Details on the company’s founding date and headquarters are not publicly available. The N2 model was first shown as a mobile navigation platform, and it gained significant media attention by placing second in the world’s first humanoid half‑marathon in April 2025, covering 21 km in 3 hours 37 minutes. The robot also appeared at cultural events such as a Spring Festival Gala, underscoring its intended role in public demonstrations. Noetix’s Hobbs robot emphasizes modular torso swapping for rapid hardware iteration, while Dora is a smaller humanoid for close human interaction. As of 2026, all models remain in development, with no official release dates, prices, or production volumes announced, keeping the N2 firmly in the prototype phase.

Buying Used — What to Check

Verify official specifications All DOF, payload, battery, and sensor data are unpublished; final production specs may differ from early prototypes.

Confirm production release date and availability The N2 is still in development with no timeline—both new and used units are unavailable until an official launch.

Inquire about software and support Developer documentation, SDK, and maintenance plans are unknown; without them, a used unit may become a hardware brick.

Câu hỏi thường gặp

One third‑party source (botinfo.ai) reported a price of ¥39,900, approximately $5,500 USD, but Noetix Robotics has not confirmed this. Prospective buyers should treat it as an estimate and contact Noetix directly when the robot becomes commercially available.
The N2 is a humanoid robot platform designed for navigation in human environments. It has demonstrated endurance walking (completing a half‑marathon in 3h37m) and has appeared at public events. Specific manipulation, sensor, or interaction capabilities are not yet published.
No, the N2 is currently in development. No release date, pre‑order option, or production schedule has been announced. Interested parties should monitor Noetix’s official channels for updates.
The Unitree G1 is a more fully‑featured humanoid with 23 DOF, 2‑hour battery life, and a published price of ~$16,000. The N2 is estimated to be much cheaper (~$5,500) but lacks confirmed specs and is not yet for sale. The G1 is the safer, better‑documented choice for research today.
Height: 118 cm; Weight: 29 kg. Degrees of freedom, battery life, max speed, and payload are not publicly disclosed. The robot sustained an average pace of ~5.8 km/h during a half‑marathon, but peak speed is unknown.
The N2 is developed by Noetix Robotics, a U.S.‑based company that also produces the Hobbs and Dora humanoid models. Founding details and headquarters location are not yet public.
Official battery runtime has not been published. The half‑marathon run of 3 hours 37 minutes demonstrates endurance under continuous walking, but it may represent a specialized race configuration rather than standard operating time.
The N2 is targeted at education, research & development, consumer/companion applications, and competitive robotics demonstrations. It is not yet deployed in any commercial industry.
Noetix has not stated software compatibility. If the platform eventually supports ROS (Robot Operating System), it would be more attractive to research labs, but this is currently unconfirmed.
Since the robot is still in development, no units have been sold to create a secondary market. Used availability will only appear after an official product launch and initial customer shipments.

Noetix N2 in 3D

Loading the 3D model…
Drag to rotate · click the model, then scroll or pinch to zoom · click a part to inspectSwipe sideways to turn · pinch to zoom · tap a part to inspect3D model credit and licence

Noetix N2 supply chain

Point at or select a step to light up its chain: bright lines are its direct links, softer lines the rest of the path from raw material to robot.

Swipe sideways to follow the whole chain.

ExtractionRefiningMaterialsComponentsModulesRobotsCompaniesLithium compounds (carbonate, chloride, hydroxide) are produced from mined lithium.Lithium is produced from brine and mineral operations.Mined copper is smelted and refined.Primary aluminium from smelters.Bauxite is refined to alumina for aluminium.6061 aluminium contains 0.8–1.2% magnesium.6061 aluminium contains 0.40–0.8% silicon.A lithium-ion cell has a cathode (positive electrode), typically a metal oxide or phosphate. IEA tracks the 2025 mix of LFP and nickel-based cathodes in electric-car batteries.Camera units are built around image sensors (CMOS image sensors from makers such as Sony and OmniVision).Silicon metal is made from silica in natural forms such as quartzite (USGS).Chips are made on wafers: thin slices of semiconductor such as crystalline silicon (Wikipedia). Silicon metal can be refined further into ultra-high-purity semiconductor-grade silicon, called polysilicon (USGS).Silicon metal can be refined further into ultra-high-purity semiconductor-grade silicon, called polysilicon (USGS). Chips are made on wafers: thin slices of crystalline silicon (Wikipedia).Memory is made on silicon wafers (Micron lists silicon wafers among its key materials); wafer silicon is refined from silicon metal (USGS).Magnesium is recovered from dolomite, serpentine, magnesium-bearing evaporite minerals and brines (USGS).In wire-bond packaging, fine gold or copper wire connects each die to its leadframe or substrate. ASE is gradually replacing gold wire with copper to cut material cost, though gold wire is still one of its main materials.Steel is made from iron ore: US mines shipped 98% of their usable iron ore to the steel industry (USGS).Precision bearing rings are made of through-hardened chromium bearing steel 100Cr6 (SAE 52100) (GMN).Sony makes its CMOS image sensors in its own production facilities in Japan (Nagasaki, Kumamoto). SIA/BCG count optoelectronics and sensors in one fab group with discrete and analog chips (DAO), apart from logic.Bosch makes its MEMS sensors in its own fabs in Reutlingen and Dresden; a MEMS sensor is a MEMS element plus an evaluation chip (ASIC).A MEMS sensor is packed in a semiconductor housing, such as an LGA package (Bosch).Micron makes its memory in its own fabs; most of its 2026 DRAM output came from Taiwan. SIA/BCG: DRAM capacity is highly concentrated in South Korea.Micron's manufacturing runs from wafer fabrication through assembly and test, with subcontractors for some steps.Mined cobalt is refined further into chemicals or metal (Cobalt Institute). In 2025 DR Congo's export restrictions left refiners short of cobalt hydroxide feed and forced some to limit production, though world refined output still rose 5% to 240 kt (Cobalt Institute).Cobalt sulphate, the largest refined cobalt product, is typically used in NCM (NMC) batteries, and cobalt tetroxide often in LCO batteries (Cobalt Institute). Cobalt-free substitutes that use iron and phosphorus (LFP) held a significant market share in China (USGS).Mined nickel ore and concentrate go to smelters and refineries. In Indonesia, laterite ore is processed into nickel pig iron and ferronickel for stainless steel, or into battery intermediates such as mixed hydroxide precipitate (IEA); the US Eagle Mine's concentrate is exported to smelters (USGS).Battery cathodes need nickel sulphate, made from Class I nickel metal or from intermediates such as mixed hydroxide precipitate and nickel matte (IEA). LFP (lithium iron phosphate) cathodes contain no nickel.Stainless steel is the biggest use of nickel, 66% of demand in 2025 (Cobalt Institute). In the US, stainless and alloy steels and nickel alloys take more than 85% of nickel use (USGS). The world made 64.2 Mt of stainless steel in 2025 (worldstainless), against about 1,900 Mt of raw steel (USGS).Lithium-ion cathodes are lithium compounds, generally a layered oxide (such as lithium cobalt oxide), a phosphate (lithium iron phosphate) or a spinel (lithium manganese oxide). Batteries took an estimated 88% of world lithium in 2025 (USGS).Natural graphite flakes must be made into spherical particles, purified to over 99.95% carbon and coated before they can be used in lithium-ion battery anodes (IEA). Natural graphite is now a small part of anode supply: under 8% of China's 2025 anode shipments (GGII), and about 14% worldwide in 2022 (Rystad).Synthetic graphite is made by calcining and graphitising petroleum coke or needle coke at nearly 3,000 °C (IEA). It was 92.7% of China's 2025 anode shipments (GGII).The negative electrode (anode) of a conventional lithium-ion cell is typically graphite. IEA's 2025 data on electric-car battery anodes show only graphite and silicon-doped graphite.89.8% of the world's plastics in 2024 were made from fossil feedstock (Plastics Europe).Solder is the largest use of tin, 51% of world tin use in 2023 (International Tin Association; in the US solder took 11%, USGS). The common lead-free alloy SAC305 is 96.5% tin (AIM).Tin-lead solder is nearly half lead (PubChem), but the electronics industry has moved toward lead-free solders (USGS): 92% of solder for electronics was lead-free in 2023 (ITA).The lead-free alloy SAC305 contains 3% silver (AIM). In the US, brazing and solder took 3% of silver (USGS).The lead-free alloy SAC305 contains 0.5% copper (AIM).FR-4 laminate is woven fibreglass cloth with an epoxy binder (Wikipedia), and fibreglass is made from silica sand (Covia).A thin layer of copper foil is laminated to one or both sides of an FR-4 panel; these are called copper-clad laminates (Wikipedia; ChinaBaogao).FR-4 epoxy resin systems typically use bromine to resist fire (Wikipedia); a grade of the brominated flame retardant TBBPA is used to make epoxy resins for circuit boards (Wikipedia). Brominated flame retardants are one of bromine's two leading uses (USGS).Barite is used to make barium carbonate, which goes into dielectrics (Wikipedia). Barium titanate, the dielectric ceramic used in capacitors, can be made by heating barium carbonate with titanium dioxide (Wikipedia).Barium titanate, the ceramic in high-capacitance MLCCs, can be made by heating barium carbonate with titanium dioxide (Wikipedia); titanium dioxide comes from ilmenite and rutile (USGS).99% of MLCCs made worldwide use base-metal electrodes of nickel or copper; the industry moved from palladium and silver to cut cost (NASA, 2015). TDK replaced palladium electrodes with nickel in 1993 (Wikipedia).Platinum-group metals are used in multilayer ceramic capacitors (USGS). High-reliability MLCCs use palladium-silver electrodes (NASA, 2015).High-reliability MLCCs use precious-metal electrodes of palladium and silver (NASA, 2015).Connector contacts are copper alloys: beryllium copper is called the best copper alloy for contacts, connectors and cables (Wikipedia), and phosphor bronze (copper-tin-phosphorus) can replace it (USGS).Copper-clad laminate is the core material of circuit boards (ChinaBaogao); FR-4 is a common material for printed circuit boards (Wikipedia).Parts are soldered onto bare boards: Adafruit's BNO055 board is a "breakout PCB", and the Raspberry Pi Zero 2 W brief warns against damage to the printed circuit board.SAC305 lead-free solder is made for soldering printed circuits, by wave, hand and SMT reflow soldering (Conro; AIM).MLCCs store and release charge and absorb noise in phones, home appliances and IoT devices (Murata). The Raspberry Pi's RP3A0 package includes the decoupling capacitors that smooth its supply voltage (Raspberry Pi).Boards carry connectors: the Raspberry Pi Zero 2 W brief speaks of the board and its connectors, and Waveshare's servo adapter has a USB-C connector and a power connector.NVIDIA's Jetson Thor modules are 100 × 87 mm and plug in through a 699-pin board-to-board (B2B) connector (NVIDIA).Rockchip states an 8 nm process for the RK3588 (it designs the chip and does not name its foundry), and the teardown gives 8 nm for the RK3588S; SIA/BCG count logic under 10 nm as the most advanced class.Brass is copper and zinc: CW614N free-cutting brass is about 39% zinc. In the US, brass and bronze are the second use of zinc after galvanized steel.Brass is mostly copper: 57–59% in CW614N free-cutting brass.Free-cutting brass such as CW614N holds 2.5–3.5% lead so it machines cleanly; lead-free brasses exist.XT30 battery plugs (G1 harness, Open Duck Mini) have gold-plated brass contacts.Antimony is used in circuit boards to cut flammability further. A review lists two studies of scrap PC boards, parts and solder still on, with 0.45% and 1.97% antimony, so the share in the laminate alone is not known.Heat sinks are often aluminium: the Go2's main board has two fans blowing over an aluminium heat sink (Simplexity).In the Unitree G1, the heat pipe and heat spreaders that teardowns show are copper: a copper heat pipe presses against a motor (a published teardown), and copper heat-spreader plates cool its knees (China Post Securities).Aluminium alloy: Noetix's manual says 'aluminium alloy structure' (铝合金结构), and its launch article that core structural parts are high-strength aluminium alloy.A plastic shell (Noetix's manual: 塑料外壳); the plastic is not named.Each joint's output bearing pairs a crossed-roller bearing with a deep-groove ball bearing (Noetix).Each joint has two encoders (Noetix: 'Dual Encoders'); Noetix designs its own motor drivers (said of its Bumi). Where the N2's drivers sit is not published.Lithium cells: Noetix calls it a lithium battery (锂电池), 48 V, 7.5 Ah, charged at 54.6 V; the cells and their maker are not published.A smart battery (智能电池) with a management board inside; Noetix does not describe it.Processor: Rockchip RK3588S, 6 TOPS NPU, 2.4 GHz (Noetix's SDK guide).4 GB of working memory (Noetix's SDK guide).The board itself: Noetix names a LubanCat (鲁班猫) RK3588S board; EmbedFire's LubanCat 4 is an RK3588S board of 85 × 56 mm (CNX Software).ASML's EUV machines print the most critical layers of the most advanced chips. DUV machines, which ASML also makes, print most of the layers in microchips (ASML annual report 2025).DUV machines, which ASML also makes, print most of the layers in microchips, and ASML's EUV machines (the NXE:3800E) are being adopted by advanced DRAM makers (ASML annual report 2025).ASML's DUV machines, 'the workhorses of the industry', print the majority of layers in chips, older-generation chips included (ASML annual report 2025).The aluminium-alloy frame, plastic shells and push rods that make up the N2's body (Noetix's manual and 3D model).18 joint modules: 5 per leg and 4 per arm (Noetix's site and 3D model).One quick-release battery in the back: 48 V, 7.5 Ah (Noetix).The LubanCat RK3588S motion-control board (Noetix's SDK guide and delivery document).N2 EDU only: an NVIDIA Jetson Orin Nano Super, 67 TOPS, for your own programs (Noetix's SDK guide and site).A depth camera behind the chest window (Noetix); its 3D file draws a second camera bar under the torso.An IMU in the torso: an 'imu' point in Noetix's MuJoCo model; the part is not named.Circuit boards besides the computers: two boards in the torso in Noetix's 3D file and the battery's smart board; Noetix designs its own control boards (said of its Bumi).Cables join the joints, battery and computers: the joints are on EtherCAT, and their cables run inside them (Noetix).Local air cooling (局部风冷散热, Noetix's SDK guide): black heat-sink fins at the back, round the port panel (Noetix's back picture).Noetix Robotics makes this robot.Quartz and silica sandQuartz and silica sandMagnesium ores and brinesMagnesium ores and brinesOil, gas and coal(plastics feedstock)Oil, gas and coal (plastics feedstock)Steel (gear, bearing andstainless grades)Steel (gear, bearing and stainless grades)Lithography machines (chipprinting)Lithography machines (chip printing)Mature-node chipfabrication (28 nm and…Mature-node chip fabrication (28 nm and older; analog and sensor chips)Memory chip fabrication(DRAM)Memory chip fabrication (DRAM)Aluminium alloysAluminium alloysBattery-grade lithiumcompoundsBattery-grade lithium compoundsLithium chemicalconversionLithium chemical conversionCopper smelting andrefiningCopper smelting and refiningAlumina refining andaluminium smeltingAlumina refining and aluminium smeltingLithium miningLithium miningCopper miningCopper miningBauxite miningBauxite miningIron ore miningIron ore miningMagnesium smeltingMagnesium smeltingSilicon metal smeltingSilicon metal smeltingLeading-edge chipfabrication (under 10 nm)Leading-edge chip fabrication (under 10 nm)Chip packaging and test(OSAT)Chip packaging and test (OSAT)Precision bearingsPrecision bearingsMemory chips (DRAM /LPDDR)Memory chips (DRAM / LPDDR)Image sensorsImage sensorsIMUs (motion sensors)IMUs (motion sensors)Lithium-ion cellsLithium-ion cellsAI compute modulesAI compute modulesCameras and depth camerasCameras and depth camerasCobalt miningCobalt miningCobalt refining (chemicalsand metal)Cobalt refining (chemicals and metal)Nickel miningNickel miningNickel smelting andrefiningNickel smelting and refiningNatural graphite miningNatural graphite miningBattery anode graphite(spherical natural and…Battery anode graphite (spherical natural and synthetic)Cathode active material(NMC, NCA, LCO, LFP)Cathode active material (NMC, NCA, LCO, LFP)Titanium minerals(ilmenite and rutile)Titanium minerals (ilmenite and rutile)Engineering plastics (ABS,PC, nylon, PEEK)Engineering plastics (ABS, PC, nylon, PEEK)Tin miningTin miningLead miningLead miningSilver miningSilver miningPalladium mining(platinum-group metals)Palladium mining (platinum-group metals)Antimony miningAntimony miningBromine (from brines)Bromine (from brines)Barite mining (barium)Barite mining (barium)Solder (tin alloys:lead-free SAC and…Solder (tin alloys: lead-free SAC and tin-lead)Copper-clad laminate (FR-4glass-fibre epoxy board…Copper-clad laminate (FR-4 glass-fibre epoxy board material)Printed circuit boards(bare boards)Printed circuit boards (bare boards)Multilayer ceramiccapacitors (MLCC)Multilayer ceramic capacitors (MLCC)Connectors and wiringharnessesConnectors and wiring harnessesElectronics assembly(circuit boards with part…Electronics assembly (circuit boards with parts soldered on)Rockchip RK3588S SoCRockchip RK3588S SoCZinc miningZinc miningBrass (copper-zinc alloy)Brass (copper-zinc alloy)Cooling fans and heatsinksCooling fans and heat sinksNoetix RoboticsNoetix RoboticsNoetix N2Noetix N2Structure: Noetix N2Structure: Noetix N2Noetix N2 joint modulesNoetix N2 joint modulesN2 battery pack (48 V, 7.5Ah)N2 battery pack (48 V, 7.5 Ah)N2 motion-control board(LubanCat RK3588S)N2 motion-control board (LubanCat RK3588S)