Giá trung bình hằng ngày
Số tiền bằng USD

Mô tả
- This motor is used in DREAM with the CM-100 and can be controlled by controlling the port. - By controlling the direction and speed of the rotation, this motor can be used to turn the wheels of a robotic car. - With the OLLO Power Switch OPS-10 and OLLO Battery Box OBB-10, you can get the OLLO Geared Motor working. Specifications Weight 15g Dimensions 18mm x 36mm x 24mm Gear Ratio 60 : 1 Speed 112 RPM (at 1.5V) / 158RPM (at 3V) Etc Outputs both axis Safety Device : Clutch Assembled Includes Actuator Geared Motor (Detachable Cable) Qty: 1 About the Robotis - CM-100A Controller This OLLO controller can be assembled onto any other OLLO parts using rivet connection. The controller can be programmed using the Roboplus Graphical Software suite from Robotis.. An IR Sensor, Buzzer and MIC are embedded in the controller and additional extension ports make it convenient to add on other devices. You will need the LN-101 USB Downloader (sold separately) to program this controller. Hardware Specifications: Weight: 22g Dimension: 345 x 247 x 48mm Operation Voltage: 2~3.5V / Recommended 3V(AA or LR x 2) Power Swtich: 1 set IR Sensor: 3 direction/ total 3 groups loaded Sound Sensor: Embedded Power Connector: 2 sets Geared Motor Port: 2 sets Multi-purpose Port: 2 sets Communication Port: 1 set (Connects to LN 101 USB Downloader, ZIG-110A or BT-110A) Compatible Products: Motor: Geared Motor (Max 2 sets), OLLO Servo Motor Sensor: IR Sensor OIS-10, Touch Sensor OTS-10 Wireless Communcation: IR Receiver OIR-10 (IR wireless control), ZIG-110A or BT-110A (RF wireless control) Downloader : USB Downloader LN-101 ** This Controller is designed for the OLLO line of products and is not compatible with Bioloid or Dynamixel. This motor is used in DREAM with the CM-100 and can be controlled by controlling the port. With the OLLO Power Switch OPS-10 and OLLO Battery Box OBB-10, you can get the OLLO Geared Motor working.
- This motor is used in DREAM with the CM-100 and can be controlled by controlling the port. - By controlling the direction and speed of the rotation, this motor can be used to turn the wheels of a robotic car. - With the OLLO Power Switch OPS-10 and OLLO Battery Box OBB-10, you can get the OLLO Geared Motor working. Specifications Weight 15g Dimensions 18mm x 36mm x 24mm Gear Ratio 60 : 1 Speed 112 RPM (at 1.5V) / 158RPM (at 3V) Etc Outputs both axis Safety Device : Clutch Assembled Includes Actuator Geared Motor (Detachable Cable) Qty: 1 About the Robotis - CM-100A Controller This OLLO controller can be assembled onto any other OLLO parts using rivet connection. The controller can be programmed using the Roboplus Graphical Software suite from Robotis.. An IR Sensor, Buzzer and MIC are embedded in the controller and additional extension ports make it convenient to add on other devices. You will need the LN-101 USB Downloader (sold separately) to program this controller. Hardware Specifications: Weight: 22g Dimension: 345 x 247 x 48mm Operation Voltage: 2~3.5V / Recommended 3V(AA or LR x 2) Power Swtich: 1 set IR Sensor: 3 direction/ total 3 groups loaded Sound Sensor: Embedded Power Connector: 2 sets Geared Motor Port: 2 sets Multi-purpose Port: 2 sets Communication Port: 1 set (Connects to LN 101 USB Downloader, ZIG-110A or BT-110A) Compatible Products: Motor: Geared Motor (Max 2 sets), OLLO Servo Motor Sensor: IR Sensor OIS-10, Touch Sensor OTS-10 Wireless Communcation: IR Receiver OIR-10 (IR wireless control), ZIG-110A or BT-110A (RF wireless control) Downloader : USB Downloader LN-101 ** This Controller is designed for the OLLO line of products and is not compatible with Bioloid or Dynamixel.
Lịch sử giá
Mỗi ngày có một điểm dữ liệu, tính trung bình theo ngày ghi nhận.
Số tiền bằng USD
Giá trung bình được tính theo ngày UTC từ tất cả giá chào bán đã ghi nhận.
🍪 Tùy chọn cookie
Chúng tôi sử dụng cookie để đo lường hiệu suất. Chính sách quyền riêng tư