new RoboSavvy robot — hình ảnh 1

N Robotics Actuator 55mm

RoboSavvy

£165,58

Tình trạng

New

The N Robotics Actuator 55 is designed for research and development for high-end gimbal systems, autonomous driving, and LiDAR system applications, but can also serve many more applications. It is a direct drive brushless actuator with a built-in motor controller. The extremely good workmanship allows the motor to reach a performance of up to 350 rpm. For data transmission, these have a Bluetooth, Wi-Fi, CAN bus, UART interface (USB interface optionally available). Technical Data Torque (measured at zero speed) 1Nm more 1,5Nm <400s 2,5Nm <20s peak 4Nm <2s Speed: 350RPM at output (3200RPM motor) 9 to 1 planetary gear reduction gear 3 phase brushless field oriented motor control system Control rate: 35khz Input voltage: 12-24V Peak electrical power: 250W Protection class: IP50 Operating temperature: -35 to 80 °C size: Ø 58 mm, max. height: 46 mm Weight: 260 g Supports firmware update via CAN bus Data bypass mode to transfer data from UART/USB to CAN bus Interfaces Interface: Bluetooth, Wi-Fi, CAN bus, UART (USB interface optionally available) 1x 10 Con 0.5 FPC connector for external encoder 1x 10 Con 0.5 FPC connector for USB 2x XT30 for power input/output 2x JST SH 3 Pin for CAN Input/Output Scope of delivery 1x N Robotics Actuator 55 N Robotics Actuator 55 Speed: 350 rpm at output (3200 rpm motor) 9 to 1 planetary gear reduction unit IP50 protection class 3 phase brushless field oriented motor control

The N Robotics Actuator 55 is designed for research and development for high-end gimbal systems, autonomous driving, and LiDAR system applications, but can also serve many more applications. It is a direct drive brushless actuator with a built-in motor controller. The extremely good workmanship allows the motor to reach a performance of up to 350 rpm. For data transmission, these have a Bluetooth, Wi-Fi, CAN bus, UART interface (USB interface optionally available). Technical Data Torque (measured at zero speed) 1Nm more 1,5Nm <400s 2,5Nm <20s peak 4Nm <2s Speed: 350RPM at output (3200RPM motor) 9 to 1 planetary gear reduction gear 3 phase brushless field oriented motor control system Control rate: 35khz Input voltage: 12-24V Peak electrical power: 250W Protection class: IP50 Operating temperature: -35 to 80 °C size: Ø 58 mm, max. height: 46 mm Weight: 260 g Supports firmware update via CAN bus Data bypass mode to transfer data from UART/USB to CAN bus Interfaces Interface: Bluetooth, Wi-Fi, CAN bus, UART (USB interface optionally available) 1x 10 Con 0.5 FPC connector for external encoder 1x 10 Con 0.5 FPC connector for USB 2x XT30 for power input/output 2x JST SH 3 Pin for CAN Input/Output Scope of delivery 1x N Robotics Actuator 55

Lịch sử giá

Lịch sử giá trung bình

Mỗi ngày có một điểm dữ liệu, tính trung bình theo ngày ghi nhận.

Giá trung bình hằng ngày

Số tiền bằng USD

$218,78
Biểu đồ lịch sử giá trung bình bằng USDBiểu đồ đường gồm 1 lần ghi nhận từ 3 thg 10, 2026 đến 3 thg 10, 2026.$218,81$218,80$218,79$218,78$218,773 thg 103 thg 10, 2026: trung bình $218,78

Giá trung bình được tính theo ngày UTC từ tất cả giá chào bán đã ghi nhận.