Giá trung bình hằng ngày
Số tiền bằng USD
DFROBOT - Bluetooth 5.0 Audio Receiver Board-Controllable Volume
DFRobot · Bluetooth 5.0 Audio Receiver Board-Controllable Volume
£2,97
Mô tả
INTRODUCTION This is a small size and cost-effective Bluetooth 5.0 Audio Receiver module with auto-reconnect feature. It supports a wide range power supply of 3.7V~24V and comes with a function button. Dial the button to the left and right to adjust volume, and press it to pause or play. You can use this module to remake your loudspeaker into wireless. Operating Instruction After the power is turned on, the blue indicator flashes quickly, and then the module enters the Bluetooth mode; After playing the “Beep”, it goes into the pairing mode, waiting for pairing; Turn on the Bluetooth of a phone, “XY-WRBT”(module Bluetooth name) will be searched and displayed, click “XY-WRBT”to connect to the board. It connects successfully with a Beep. When the indicator is always on, you can play your music on the phone, and the indicator keeps slowly blinking when playing music. Scenario Note The decoder board will automatically turn off when the voltage of the power supply battery is lower than 3.3V. It can be turned on by replacing the battery or short circuit the on/off contacts for 2 seconds when the current battery is fully charged. Noise may occur when the voltage of the power supply battery is too low, which also indicates it needs to be recharged. Since there is no lithium battery protection circuit on the decoder board, it is recommended to use this module with a Lipo Charger board. Pay attention to the electrostatic protection. Since the Bluetooth chip is very sensitive to static electricity, you must discharge the static electricity on your hand to avoid causing damage to the chip when touching it with a bare hand. Bluetooth antenna signal is easy to be influenced by high-frequency or strong electromagnetic signal, so please try to keep the module away from radio transmitting devices, and this board should not be placed close to any metal objects. SPECIFICATION Power Supply: 3.7V-24V Bluetooth Version: 5.0 (Backward compatible with Bluetooth 4.2, 4.1, 4.0) Transmission Distance: 15m（Visible） Audio Decoding: WAV, APE, FLAC, MP3 Dimension: 30*44mm/1.18*1.73” SHIPPING LIST Bluetooth 5.0 Audio Receiver Board-Controllable Volume x1
INTRODUCTION This is a small size and cost-effective Bluetooth 5.0 Audio Receiver module with auto-reconnect feature. It supports a wide range power supply of 3.7V~24V and comes with a function button. Dial the button to the left and right to adjust volume, and press it to pause or play. You can use this module to remake your loudspeaker into wireless. Operating Instruction After the power is turned on, the blue indicator flashes quickly, and then the module enters the Bluetooth mode; After playing the “Beep”, it goes into the pairing mode, waiting for pairing; Turn on the Bluetooth of a phone, “XY-WRBT”(module Bluetooth name) will be searched and displayed, click “XY-WRBT”to connect to the board. It connects successfully with a Beep. When the indicator is always on, you can play your music on the phone, and the indicator keeps slowly blinking when playing music. Scenario Note The decoder board will automatically turn off when the voltage of the power supply battery is lower than 3.3V. It can be turned on by replacing the battery or short circuit the on/off contacts for 2 seconds when the current battery is fully charged. Noise may occur when the voltage of the power supply battery is too low, which also indicates it needs to be recharged. Since there is no lithium battery protection circuit on the decoder board, it is recommended to use this module with a Lipo Charger board. Pay attention to the electrostatic protection. Since the Bluetooth chip is very sensitive to static electricity, you must discharge the static electricity on your hand to avoid causing damage to the chip when touching it with a bare hand. Bluetooth antenna signal is easy to be influenced by high-frequency or strong electromagnetic signal, so please try to keep the module away from radio transmitting devices, and this board should not be placed close to any metal objects. SPECIFICATION Power Supply: 3.7V-24V Bluetooth Version: 5.0 (Backward compatible with Bluetooth 4.2, 4.1, 4.0) Transmission Distance: 15m（Visible） Audio Decoding: WAV, APE, FLAC, MP3 Dimension: 30*44mm/1.18*1.73” SHIPPING LIST Bluetooth 5.0 Audio Receiver Board-Controllable Volume x1
Lịch sử giá
Lịch sử giá trung bình
Mỗi ngày có một điểm dữ liệu, tính trung bình theo ngày ghi nhận.
$3,93
Giá trung bình được tính theo ngày UTC từ tất cả giá chào bán đã ghi nhận.
Tin đăng liên quan
DFRobot - Arduino Ethernet Shield (Support Mega and SD Card)
DFRobot
£12,08
DFRobot - Servo Controller DFR0136 ATmega328P (Arduino Compatible)
DFRobot
£11
DFRobot - MiniQ Discovery Kit
DFRobot
£79,33
DFRobot - Gravity: 4 Channel Relay Shield for Arduino
DFRobot
£14,50
DFRobot - Romeo V2-All in one Controller
DFRobot
£39,92
DFRobot - Wireless GamePad V2.0 for Arduino
DFRobot
£51
Robotis FP04-F53 Structural Components (x4)
Robotis
2,82 €
Robotis FP04-F54 Structural Components (x4)
Robotis
2,82 €
Hobby Gearmotor - 140 RPM, Male Connectors (Single)
RoboSavvy
£2,70
Machine Screw - Socket Head (6-32 ; 1/2"; 25 pack)
RoboSavvy
£2,75
Machine Screw - Socket Head (6-32 ; 5/8"; 25 pack)
RoboSavvy
£3
Robotis - OLLO Battery Box OBB-10A
Robotis
£2,83