Günlük ortalama fiyat
USD cinsinden tutarlar
Açıklama
This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors terminated with 150mm cables and 3-pin female servo headers. These wheel encoders require a supply voltage of 3-24V with a supply current of 4mA.Features:Supply Voltage: 3-24VSupply Current: 4mA per sensorOutput Voltage: 26V MaxOutput Current: 25mA ContinuousDocuments:DatasheetRedBot Assembly Guide
This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors terminated with 150mm cables and 3-pin female servo headers. These wheel encoders require a supply voltage of 3-24V with a supply current of 4mA.Features:Supply Voltage: 3-24VSupply Current: 4mA per sensorOutput Voltage: 26V MaxOutput Current: 25mA ContinuousDocuments:DatasheetRedBot Assembly Guide
Fiyat geçmişi
Ortalama fiyat geçmişi
Gözlem tarihine göre ortalaması alınmış, günde bir veri noktası.
$13,81
Ortalamalar, kaydedilen tüm teklif fiyatları kullanılarak UTC günlerine göre hesaplanır.
İlgili İlanlar
BIOLOID Skin FP04-F56/F57/F58/F59 Set
RoboSavvy
£11,08
Micro Gearmotor - 110 RPM (6-12V)
RoboSavvy
£10,17
Micro Gearmotor - 2600 RPM (6-12V)
RoboSavvy
£10,17
Micro Gearmotor - 4900 RPM (6-12V)
RoboSavvy
£10,17
Robot Cable-3P 60mm 10pcs
RoboSavvy
£10,25
Servo - Generic, 180° Rotation (Sub-Micro Size)
RoboSavvy
£9,70
Servo - Generic (Sub-Micro Size)
RoboSavvy
£9,70
Small Stepper Motor - 100 g.cm (48 steps/rev, 100mm Wire)
RoboSavvy
£11,12
SparkFun Mini Stepper Motor Driver - TC78H670FTG
RoboSavvy
£9,52
Standard Gripper Kit A - Channel Mount
RoboSavvy
£9,58
Standard Gripper Kit B - Straight Mount
RoboSavvy
£9,58
2S/3S LIPO Battery Charger LBC-10
RoboSavvy
£12,25