Günlük ortalama fiyat
USD cinsinden tutarlar
Açıklama
INTRODUCTION This bipolar stepper motor with planet gear box (gear ratio: 5.18) uses a standard 8mm-diameter D type output shaft, and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.6 A at 2.78 V, allowing for a holding torque of 18kg-cm (176N-cm). The motor has a body dimension of 42mm square and 40mm in length, while the planet gear box is 36mm in diameter and 27mm in length. The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be easily mounted with 4 M3 threaded holes and can be controlled with the Dual Bipolar Stepper Motor Shield for Arduino (A4988). Notice: please carefully confirm techical details (torque, dimension, mounting, etc) for your project(s) before purchasing. APPLICATIONS Printer 3D Printer CNC Robotics Linear Actuators SPECIFICATION Model No:36PA5.2G-42BYG40-160-4A Step Angle (degrees) :1.8 2 Phase Rated Current : [email protected] /* */ ,0.37A@12V Holding Torque : 3.5kg*cm (48.6 oz/in) Hold Torque with Gearbox: 18kg·cm (176N·cm) Gear Ratio: 5.18:1 Winding resistance: 1.5 Ω Winding inductance: 2.5 mH Max flux linkage: 1.8 Vs Step Angle Accuracy : ±5% (full step, no load) Resistance Accuracy: ±10% Inductance Accuracy: ±20% Temperature Rise: 80°C Max.(rated current,2 phase on) Ambient Temperature: -20°C~+50°C Insulation Class: B Dimension: 42×42×40mm Mounting: 4 x M3 Mounting Hole Diameter：Φ28 DOCUMENTS Mechanic Datasheet SHIPPING LIST Stepper Motor with Planet Gear Box ×1 Bipolar Stepper Motor with Planet Gear Box (18kg.cm). This bipolar stepper motor with planet gear box (gear ratio: 5.18) uses a standard 8mm-diameter D type output shaft, and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.6 A at 2.78 V, allowing for a holding torque of 18kg-cm (176N-cm). The motor has a body dimension of 42mm square and 40mm in length, while the planet gear box is 36mm in diameter and 27mm in length.
INTRODUCTION This bipolar stepper motor with planet gear box (gear ratio: 5.18) uses a standard 8mm-diameter D type output shaft, and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.6 A at 2.78 V, allowing for a holding torque of 18kg-cm (176N-cm). The motor has a body dimension of 42mm square and 40mm in length, while the planet gear box is 36mm in diameter and 27mm in length. The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be easily mounted with 4 M3 threaded holes and can be controlled with the Dual Bipolar Stepper Motor Shield for Arduino (A4988). Notice: please carefully confirm techical details (torque, dimension, mounting, etc) for your project(s) before purchasing. APPLICATIONS Printer 3D Printer CNC Robotics Linear Actuators SPECIFICATION Model No:36PA5.2G-42BYG40-160-4A Step Angle (degrees) :1.8 2 Phase Rated Current : [email protected] /* */ ,0.37A@12V Holding Torque : 3.5kg*cm (48.6 oz/in) Hold Torque with Gearbox: 18kg·cm (176N·cm) Gear Ratio: 5.18:1 Winding resistance: 1.5 Ω Winding inductance: 2.5 mH Max flux linkage: 1.8 Vs Step Angle Accuracy : ±5% (full step, no load) Resistance Accuracy: ±10% Inductance Accuracy: ±20% Temperature Rise: 80°C Max.(rated current,2 phase on) Ambient Temperature: -20°C~+50°C Insulation Class: B Dimension: 42×42×40mm Mounting: 4 x M3 Mounting Hole Diameter：Φ28 DOCUMENTS Mechanic Datasheet SHIPPING LIST Stepper Motor with Planet Gear Box ×1
Fiyat geçmişi
Ortalama fiyat geçmişi
Gözlem tarihine göre ortalaması alınmış, günde bir veri noktası.
$41,95
Ortalamalar, kaydedilen tüm teklif fiyatları kullanılarak UTC günlerine göre hesaplanır.
İlgili İlanlar
GNSS Magnetic Antenna Mount - 5/8" 11-TPI
RoboSavvy
£30,35
Love to Code Chibi Scope Display Accessory
RoboSavvy
£28,92
Multi-Chassis - 4WD Kit (ATV)
RoboSavvy
£34,50
Serial Miniature LCD Module - 1.44" (uLCD-144-G2 GFX)
RoboSavvy
£31,03
Servo - Hitec HS-625MG (Standard Size)
RoboSavvy
£34,42
Servo - Hitec HS-85MG (Micro Size)
RoboSavvy
£31,92
Three Phase Brushless Gimbal Stabilizer Motor
RoboSavvy
£34,43
ZIPPY 5000mAh 2S1P 30C Hardcase Pack
RoboSavvy
£30,75
12V DC Motor 350RPM w/Encoder (12kg*cm)
RoboSavvy
£24,67
Arducam Upgraded Camera Pan Tilt Platform
RoboSavvy
£22,48
Liquid Pump - 350GPH (12v)
RoboSavvy
£24,65
Liquid Pump - 500GPH (12V)
RoboSavvy
£24,69