Prezz medju ta’ kuljum
Ammonti f{currency}
Deskrizzjoni
Robotis - 2S/3S LIPO Battery Charger LBC-10 Description: This charger is intended for the Li-Po battery in the Bioloid Premium Kit, it uses the SMPS for power when charging, thus it must be accompanied with the SMPS 12V 5A. Support 2S and 3S Cell charge. (Exception, does not charge simultaneously) Specification: Input Voltage : 10-18V Output Voltage : 2S Cell : 8.4V 3S Cell : 12.6V Output Current : 1.1A STATUS : RED LED ON : Charging GREEN LED ON : Charge Complete RED LED Blinking : Bad Battery Connection WARNING! Do not apply heat, water or any other liquid on the battery. Do not take the battery apart. Do not use damaged batteries. (inflated, deformed, damaged, etc) Do not charge 2S and 3S Cell together at once. When charging, make sure the battery is connected into the correct polarity. Do not charge when the battery is hot. Please charge after it has cooled off. When the battery is not being used, please take apart. Do not charge the battery when it is being used by the controller.
Robotis - 2S/3S LIPO Battery Charger LBC-10 Description: This charger is intended for the Li-Po battery in the Bioloid Premium Kit, it uses the SMPS for power when charging, thus it must be accompanied with the SMPS 12V 5A. Support 2S and 3S Cell charge. (Exception, does not charge simultaneously) Specification: Input Voltage : 10-18V Output Voltage : 2S Cell : 8.4V 3S Cell : 12.6V Output Current : 1.1A STATUS : RED LED ON : Charging GREEN LED ON : Charge Complete RED LED Blinking : Bad Battery Connection WARNING! Do not apply heat, water or any other liquid on the battery. Do not take the battery apart. Do not use damaged batteries. (inflated, deformed, damaged, etc) Do not charge 2S and 3S Cell together at once. When charging, make sure the battery is connected into the correct polarity. Do not charge when the battery is hot. Please charge after it has cooled off. When the battery is not being used, please take apart. Do not charge the battery when it is being used by the controller.
Storja tal-prezzijiet
Storja tal-prezz medju
Punt tad-dejta wieħed għal kull jum, ikkalkulat bħala medja skont id-data tal-osservazzjoni.
$16.19
Il-medji jiġu kkalkulati għal kull jum UTC mill-prezzijiet kollha tal-offerti rreġistrati.
Elenki relatati
BIOLOID Skin FP04-F56/F57/F58/F59 Set
RoboSavvy
£11.08
Cable Carrier - 10x15mm (0.5m Length)
RoboSavvy
£12.37
Gear - Hub Mount (76T; 0.5" Bore)
RoboSavvy
£11.75
Gear - Pinion Gear (16T; 0.25" Bore)
RoboSavvy
£11.75
Gear - Pinion Gear (20T; 6mm Bore)
RoboSavvy
£11.75
Gear - Pinion Gear (32T; 6mm Bore)
RoboSavvy
£11.75
Pi-Camera Frame Set
RoboSavvy
£12.25
Robot Cable-X3P 180mm 10pcs (Convertible)
RoboSavvy
£12.25
Robot Cable-X4P 180mm (Convertible) 10pcs
RoboSavvy
£12.92
Robot Cable-4P 60mm 10pcs
RoboSavvy
£11.92
Servo Extension - CAT6 (boosted)
RoboSavvy
£11.75
Servo - Generic Continuous Rotation (Micro Size)
RoboSavvy
£13.11