Prezz medju ta’ kuljum
Ammonti f{currency}
Deskrizzjoni
HackRF shown for installation demonstrational purposes only. HackRF is sold separately. This kit requires basic soldering skills. Though these components are 'easy' to solder we don't recommend learning on your brand new HackRF! The plastic enclosure included with HackRF slightly impedes the RF shield footprint area. This can be rectified either by purchasing our custom HackRF aluminum enclosure, or through minor modification of the plastic case, which can be done with a sharp hobby knife and a few minutes of time. This kit contains the unpopulated RF shield for HackRF to help reduce stray EMI. The shield frame needs to be soldered to the board, and the shield cover mounts atop the frame. Also included is the GND clip testpoint, J10, and a 20 position female header for P30 (BANK2_AUX). EMI shield and component kit for HackRF One. 4 pieces.
HackRF shown for installation demonstrational purposes only. HackRF is sold separately. This kit requires basic soldering skills. Though these components are 'easy' to solder we don't recommend learning on your brand new HackRF! The plastic enclosure included with HackRF slightly impedes the RF shield footprint area. This can be rectified either by purchasing our custom HackRF aluminum enclosure, or through minor modification of the plastic case, which can be done with a sharp hobby knife and a few minutes of time. This kit contains the unpopulated RF shield for HackRF to help reduce stray EMI. The shield frame needs to be soldered to the board, and the shield cover mounts atop the frame. Also included is the GND clip testpoint, J10, and a 20 position female header for P30 (BANK2_AUX).
Storja tal-prezzijiet
Storja tal-prezz medju
Punt tad-dejta wieħed għal kull jum, ikkalkulat bħala medja skont id-data tal-osservazzjoni.
$18.72
Il-medji jiġu kkalkulati għal kull jum UTC mill-prezzijiet kollha tal-offerti rreġistrati.
Elenki relatati
Brushless DC Motor with Encoder 12V 159RPM
RoboSavvy
£15.50
Circular Robotics Chassis Kit (Two-Layer)
RoboSavvy
£13.50
EasyDriver - Stepper Motor Driver
RoboSavvy
£13.86
Parallel Gripper Kit A - Channel Mount
RoboSavvy
£14.25
Robot Cable-X3P 180mm 10pcs
RoboSavvy
£15
Robot Cable-X4P 180mm (Convertible) 10pcs
RoboSavvy
£12.92
Servo Gear - Futaba (16T; Metal)
RoboSavvy
£13.50
Servo Gear - Hitec (20T; Metal)
RoboSavvy
£13.50
Servo - Generic Continuous Rotation (Micro Size)
RoboSavvy
£13.11
Servo - Generic High Torque Continuous Rotation (Standard Size)
RoboSavvy
£15.36
Servo - Generic High Torque (Standard Size)
RoboSavvy
£14.20
Servo - Generic Metal Gear (Micro Size)
RoboSavvy
£14.25