Prezz medju ta’ kuljum
Ammonti f{currency}
DFRobot - Servo Controller DFR0136 ATmega328P (Arduino Compatible)
DFRobot · Servo Controller DFR0136 ATmega328P Arduino Compatible
£11
Deskrizzjoni
DFRobot - Flyduino-A 12 Servo Controller (Arduino Compatible) This is probably the smallest Arduino controller speically designed for controlling the servo. It features a 12 standard servo control capbility with Xbee socket which can be used to control helicopter or UAV via the Xbee link. The feather weight (7.5g) make it an ideal controller for those application that has limited payload. The build in regulator is allow the input voltage vary from 3.5-8V which fits the most power supply without any modification. With the benifit of Arduino IDE, the coding becomes extremely easy. Note: A FTDI Basic breakout is required to upload the program (@3.3V) Warning: The controller is working under 3.3V, please do not program it with a 5V FTDI breakout, it will damage the module permently. Specifications: CPU:Atmega328P Working voltage:3.3V Input voltage:3.5-8V (regulated) 12 Channel servo control Xbee socket Analog input: 8 SRAM:2K EEPROM:1K Weight:7.5 gram Documents: Programming IDE: Arduino IDE
DFRobot - Flyduino-A 12 Servo Controller (Arduino Compatible) This is probably the smallest Arduino controller speically designed for controlling the servo. It features a 12 standard servo control capbility with Xbee socket which can be used to control helicopter or UAV via the Xbee link. The feather weight (7.5g) make it an ideal controller for those application that has limited payload. The build in regulator is allow the input voltage vary from 3.5-8V which fits the most power supply without any modification. With the benifit of Arduino IDE, the coding becomes extremely easy. Note: A FTDI Basic breakout is required to upload the program (@3.3V) Warning: The controller is working under 3.3V, please do not program it with a 5V FTDI breakout, it will damage the module permently. Specifications: CPU:Atmega328P Working voltage:3.3V Input voltage:3.5-8V (regulated) 12 Channel servo control Xbee socket Analog input: 8 SRAM:2K EEPROM:1K Weight:7.5 gram Documents: Programming IDE: Arduino IDE
Storja tal-prezzijiet
Storja tal-prezz medju
Punt tad-dejta wieħed għal kull jum, ikkalkulat bħala medja skont id-data tal-osservazzjoni.
$14.53
Il-medji jiġu kkalkulati għal kull jum UTC mill-prezzijiet kollha tal-offerti rreġistrati.
Elenki relatati
DFRobot - Arduino Ethernet Shield (Support Mega and SD Card)
DFRobot
£12.08
DFRobot - Gravity: 4 Channel Relay Shield for Arduino
DFRobot
£14.50
DFROBOT - Bluetooth 5.0 Audio Receiver Board-Controllable Volume
DFRobot
£2.97
DFRobot - MiniQ Discovery Kit
DFRobot
£79.33
DFRobot - Romeo V2-All in one Controller
DFRobot
£39.92
DFRobot - Wireless GamePad V2.0 for Arduino
DFRobot
£51
xTool Filter Pack for M1 Ultra (10pcs)
xTool
$10
xTool Fine-point Blade for M1 Ultra
xTool
$10
ROLA Mini Accessory-Magnetic Charging Cable
Enabot
$9.99
LBB-040 Battery Charger for LB-040 Battery (DARwin-Mini)
Unitree
11.54 €
Set-ISW-01 Wheel Set for TurtleBot3
Robotis
11.54 €
Robotis FP04-F6 Structural Components (x12)
Robotis
10.07 €