robot humanoid

LimX Dynamics Luna — Spesifikasi, Harga & Tempat Membeli (2026)

The LimX Dynamics Luna is a quadruped-to-biped bridging research robot made by LimX Dynamics in Shenzhen, China. Price: $22,000 (pre-order). Key specs: 12 degrees of freedom, 50 cm height, 25 kg weight, 3-hour battery life, 12.6 km/h max speed, and 10 kg payload. It is available for pre-order; used units are expected to appear on Robot Overflow later in 2026.

💰Harga
$18,000 – $20,000
📅Dibina pertama kali
2025
🌍Asal
CN
📏Ketinggian
50 cm
⚖️Berat
25 kg
🦾Darjah kebebasan
12
🏃Kelajuan maksimum
3.5 m/s
📦Muatan
10 kg
🔋Bateri
3 hours
🛒Ketersediaan
Tersedia

What is the Limx Luna?

The LimX Dynamics Luna is a unique quadruped-to-biped bridging platform designed to study and demonstrate advanced legged locomotion. Built by LimX Dynamics (Shenzhen, China), it can transition between quadrupedal and bipedal gaits, inheriting agility from the company’s earlier P1 biped and Oli quadruped. Standing 50 cm tall and weighing 25 kg, Luna is a compact yet capable research machine. Its 12 degrees of freedom enable dynamic balancing, stair climbing, and smooth gait transitions. With a 10 kg payload capacity, it can carry sensors or lightweight manipulators. Luna targets researchers exploring hybrid locomotion, teleoperation, and multi‑terrain mobility—delivering a cost-effective alternative to industrial quadrupeds.

Specifications

Here are the full technical specifications.

SpecValue
Height50 cm
Weight25 kg
Degrees of freedom12
Battery life3 hours
Max speed3.5 m/s (12.6 km/h)
Payload10 kg
Price (new)$22,000
Price (used range)~$18,000–$20,000 (est. once available)

Price & Value

New MSRP: $22,000

Used range: ~$18,000–$20,000 (est. once available)

At $22,000, the Luna sits in the mid‑range of research‑grade quadrupeds—well below a Boston Dynamics Spot (>$75k) but above entry‑level units like the Unitree Go2 (~$8k). Its unique bridging capability justifies the premium for locomotion labs, though early adopters should expect limited software tooling compared to more established platforms. Depreciation is likely moderate: once a secondary market emerges (expected late 2026), units may lose 10–20% due to Luna’s niche appeal and ongoing development. Total cost of ownership stays low—no mandatory service contracts, and standard Li‑ion battery replacement keeps operating expenses predictable.

Who Is It For?

Best for: - University robotics labs researching bipedal/quadrupedal locomotion transitions - Industrial R&D teams exploring agile mobile manipulation with a payload of up to 10 kg - Inspection operators needing a compact, 3.5 m/s robot for confined or rugged environments

Not for: - Heavy‑duty outdoor logistics (10 kg payload limits carry‑all capability) - Beginners requiring plug‑and‑play operation—Luna demands tuning for each gait transition

Alternatives & Comparison

Luna occupies a niche between low‑cost educational quadrupeds and high‑end industrial platforms. Its quadruped‑to‑biped transition is a defining differentiator—no competitor in this price bracket offers a comparable bridging mode.

ModelPriceAvailableKey Difference
Unitree Go2~$8,000yesLower cost but lacks bipedal capability; payload only ~5 kg and fewer gaits.
Deep Robotics Jueying X20~$20,000–$25,000yesRugged industrial design with IP67 rating, higher payload (20 kg), but no bipedal transitions.
Boston Dynamics Spot~$75,000yesProven industrial platform, but 3.4× costlier; no quadruped‑to‑biped bridging.

Verdict: If your work hinges on studying gait transitions and you can accept a modest payload, the Luna is unmatched at $22k. For purely industrial inspection in harsh environments, the Jueying X20’s ruggedness and higher payload win. For labs on a tight budget, the Go2 delivers basic locomotion at one‑third the price—but offers no bipedal research dimension.

Use Cases & Capabilities

Locomotion Research

Luna’s ability to seamlessly transition between quadrupedal and bipedal gaits makes it a testbed for gait planning, reinforcement learning, and biomechanics studies. Researchers can program custom transitions, test stability on uneven terrain, and evaluate dynamic balance strategies. Its 12 DOF provide enough articulation for realistic motion without the complexity of a full humanoid. The 10 kg payload allows carrying additional sensors like lidar or cameras to record motion data.

Search and Rescue Assessment

In disaster‑response simulations, Luna’s compact 50 cm frame can navigate collapsed structures, switching to bipedal mode to climb over obstacles. The 3.5 m/s top speed enables rapid area coverage, while 3‑hour battery life sustains extended missions. Although not yet IP‑rated for rain or dust, its rugged tireless design shows promise for future hardened versions. For now, it serves as a prototype for evaluating agile response robots

Industrial Inspection

Luna can carry thermal cameras or gas sensors on 10 kg mounts to inspect pipelines, factories, or warehouses. Bipedal posture allows it to peer above obstacles or read elevated gauges—a capability fixed‑height quadrupeds lack. Its 3.5 m/s speed shortens inspection rounds, while the 3‑hour battery covers most shift‑length patrols. However, off‑the‑shelf autonomy packages are still maturing, requiring integration work.

Entertainment & Education

Universities and tech showcases use Luna to engage students in legged robotics. Its theatrical gait changes—walking on four legs then rising to two—capture audiences at exhibitions. The open CAN‑bus interface lets students program motions, while the $22k price makes it more accessible than a full‑size humanoid. Its unique locomotion demos often become the highlight of STEM outreach events.

History & Background

LimX Dynamics was founded in 2022 in Shenzhen, China, with a focus on legged locomotion. After unveiling the P1 biped and Oli quadruped, the company introduced Luna in 2025 as an evolution of both platforms, aiming to bridge quadrupedal and bipedal gaits. The first public detailed reveal took place at the Taobao Influencer Festival in March 2026. Currently in its first generation, Luna has not yet undergone a full commercial launch, but pre‑orders are accepted directly from LimX. Early demonstrations highlight smooth transitions and dynamic stability, positioning LimX as a contender in the agile legged‑robot market.

Buying Used — What to Check

Verify battery health A 3‑hour battery degrades over cycles—ensure used unit holds at least 2.5 h of runtime for research continuity.

Inspect actuator play High‑torque bipedal transitions stress joints; excessive backlash or noise signals wear that affects gait precision.

Confirm latest firmware Luna’s bridging libraries are under active development; a unit with outdated software may lack stability improvements.

Soalan Lazim

The Luna is priced at $22,000 when purchased new directly from LimX Dynamics. No official leasing or rental program exists, but some Chinese integrators may offer demo units at similar cost.
Luna can walk on four legs, rise onto two legs, and transition smoothly between these gaits. It reaches 12.6 km/h on flat ground, carries a 10 kg payload, and operates for 3 hours per charge, making it suitable for locomotion research, inspection, and educational demonstrations.
Yes, currently via pre‑order from LimX Dynamics (Shenzhen, China). First customer shipments are expected later in 2026. Used units are not yet on the market but may appear on Robot Overflow once early adopters upgrade.
Spot ($75k+) is a mature industrial robot with IP54 rating, 14 kg payload, and extensive autonomy software. Luna ($22k) trades ruggedness and sensor payload for its unique quadruped‑to‑biped bridging mode, making it better for gait research at a fraction of Spot’s cost.
Height 50 cm, weight 25 kg, 12 degrees of freedom, max speed 3.5 m/s (12.6 km/h), battery life 3 hours, payload 10 kg.
LimX Dynamics, a Shenzhen‑based robotics company founded in 2022, designs and manufactures Luna. The company also developed the P1 biped and Oli quadruped platforms.
The Luna provides up to 3 hours of continuous operation on a single charge. Charging time has not been disclosed, but typical Li‑ion systems require around 2–3 hours. The battery is likely user‑swappable given the research‑oriented design.
Primarily academia and corporate R&D labs studying legged mobility. Early deployments include locomotion research, search‑and‑rescue prototype testing, and industrial inspection demonstrations in China.
LimX Dynamics has not published an IP rating for Luna. It appears designed for indoor or dry outdoor environments; heavy rain or dust exposure is not recommended.
While its 10 kg payload and 3.5 m/s speed could support light deliveries, Luna is optimized for gait research rather than autonomous last‑mile logistics. Dedicated delivery robots typically offer larger payloads and self‑charging docks.

LimX Luna in 3D

Loading the 3D model…
Drag to rotate · click the model, then scroll or pinch to zoom · click a part to inspectSwipe sideways to turn · pinch to zoom · tap a part to inspect3D model credit and licence

LimX Luna supply chain

Point at or select a step to light up its chain: bright lines are its direct links, softer lines the rest of the path from raw material to robot.

Swipe sideways to follow the whole chain.

ExtractionRefiningMaterialsComponentsModulesRobotsCompaniesMined copper is smelted and refined.Primary aluminium from smelters.Bauxite is refined to alumina for aluminium.6061 aluminium contains 0.8–1.2% magnesium.6061 aluminium contains 0.40–0.8% silicon.Camera units are built around image sensors (CMOS image sensors from makers such as Sony and OmniVision).Silicon metal is made from silica in natural forms such as quartzite (USGS).Silicon metal can be refined further into ultra-high-purity semiconductor-grade silicon, called polysilicon (USGS). Chips are made on wafers: thin slices of crystalline silicon (Wikipedia).Memory is made on silicon wafers (Micron lists silicon wafers among its key materials); wafer silicon is refined from silicon metal (USGS).Magnesium is recovered from dolomite, serpentine, magnesium-bearing evaporite minerals and brines (USGS).In wire-bond packaging, fine gold or copper wire connects each die to its leadframe or substrate. ASE is gradually replacing gold wire with copper to cut material cost, though gold wire is still one of its main materials.Sony makes its CMOS image sensors in its own production facilities in Japan (Nagasaki, Kumamoto). SIA/BCG count optoelectronics and sensors in one fab group with discrete and analog chips (DAO), apart from logic.Bosch makes its MEMS sensors in its own fabs in Reutlingen and Dresden; a MEMS sensor is a MEMS element plus an evaluation chip (ASIC).A MEMS sensor is packed in a semiconductor housing, such as an LGA package (Bosch).Micron makes its memory in its own fabs; most of its 2026 DRAM output came from Taiwan. SIA/BCG: DRAM capacity is highly concentrated in South Korea.Micron's manufacturing runs from wafer fabrication through assembly and test, with subcontractors for some steps.Mined nickel ore and concentrate go to smelters and refineries. In Indonesia, laterite ore is processed into nickel pig iron and ferronickel for stainless steel, or into battery intermediates such as mixed hydroxide precipitate (IEA); the US Eagle Mine's concentrate is exported to smelters (USGS).Solder is the largest use of tin, 51% of world tin use in 2023 (International Tin Association; in the US solder took 11%, USGS). The common lead-free alloy SAC305 is 96.5% tin (AIM).Tin-lead solder is nearly half lead (PubChem), but the electronics industry has moved toward lead-free solders (USGS): 92% of solder for electronics was lead-free in 2023 (ITA).The lead-free alloy SAC305 contains 3% silver (AIM). In the US, brazing and solder took 3% of silver (USGS).The lead-free alloy SAC305 contains 0.5% copper (AIM).FR-4 laminate is woven fibreglass cloth with an epoxy binder (Wikipedia), and fibreglass is made from silica sand (Covia).A thin layer of copper foil is laminated to one or both sides of an FR-4 panel; these are called copper-clad laminates (Wikipedia; ChinaBaogao).FR-4 epoxy resin systems typically use bromine to resist fire (Wikipedia); a grade of the brominated flame retardant TBBPA is used to make epoxy resins for circuit boards (Wikipedia). Brominated flame retardants are one of bromine's two leading uses (USGS).Barite is used to make barium carbonate, which goes into dielectrics (Wikipedia). Barium titanate, the dielectric ceramic used in capacitors, can be made by heating barium carbonate with titanium dioxide (Wikipedia).Barium titanate, the ceramic in high-capacitance MLCCs, can be made by heating barium carbonate with titanium dioxide (Wikipedia); titanium dioxide comes from ilmenite and rutile (USGS).99% of MLCCs made worldwide use base-metal electrodes of nickel or copper; the industry moved from palladium and silver to cut cost (NASA, 2015). TDK replaced palladium electrodes with nickel in 1993 (Wikipedia).Platinum-group metals are used in multilayer ceramic capacitors (USGS). High-reliability MLCCs use palladium-silver electrodes (NASA, 2015).High-reliability MLCCs use precious-metal electrodes of palladium and silver (NASA, 2015).Indium tin oxide (ITO), which takes most of the world's indium, is the conductive coating in flat-panel displays, most commonly LCDs (USGS).Connector contacts are copper alloys: beryllium copper is called the best copper alloy for contacts, connectors and cables (Wikipedia), and phosphor bronze (copper-tin-phosphorus) can replace it (USGS).Copper-clad laminate is the core material of circuit boards (ChinaBaogao); FR-4 is a common material for printed circuit boards (Wikipedia).Parts are soldered onto bare boards: Adafruit's BNO055 board is a "breakout PCB", and the Raspberry Pi Zero 2 W brief warns against damage to the printed circuit board.SAC305 lead-free solder is made for soldering printed circuits, by wave, hand and SMT reflow soldering (Conro; AIM).MLCCs store and release charge and absorb noise in phones, home appliances and IoT devices (Murata). The Raspberry Pi's RP3A0 package includes the decoupling capacitors that smooth its supply voltage (Raspberry Pi).Boards carry connectors: the Raspberry Pi Zero 2 W brief speaks of the board and its connectors, and Waveshare's servo adapter has a USB-C connector and a power connector.Brass is copper and zinc: CW614N free-cutting brass is about 39% zinc. In the US, brass and bronze are the second use of zinc after galvanized steel.Brass is mostly copper: 57–59% in CW614N free-cutting brass.Free-cutting brass such as CW614N holds 2.5–3.5% lead so it machines cleanly; lead-free brasses exist.XT30 battery plugs (G1 harness, Open Duck Mini) have gold-plated brass contacts.Antimony is used in circuit boards to cut flammability further. A review lists two studies of scrap PC boards, parts and solder still on, with 0.45% and 1.97% antimony, so the share in the laminate alone is not known.Seven micro brushless joint motors in each Dex3-1 (Unitree's F-1515 series, 45 g each): six drive their joints directly, one through gears (Unitree).The Dex3-1's tactile version has 33 pressure sensors in 9 arrays (palm, finger pads and fingertips) that feel from 10 g to 2,500 g (Unitree). Unitree makes them an option.MEMS microphones are silicon chips: the diaphragm is etched into a silicon wafer (Wikipedia). Pollen's HAT uses a MEMS microphone.Heat sinks are often aluminium: the Go2's main board has two fans blowing over an aluminium heat sink (Simplexity).In the Unitree G1, the heat pipe and heat spreaders that teardowns show are copper: a copper heat pipe presses against a motor (a published teardown), and copper heat-spreader plates cool its knees (China Post Securities).LimX: 'premium fabric-wrapped surfaces' and 'premium textile finishes'.LimX: 'An enhanced battery management system'; a battery management board.LimX's table: two Rockchip RK3588 processors ('RK3588 / 16G / 256G', 'RK3588 / 8G / 32G').LimX's table: 16 GB and 8 GB of memory on the two boards.The computers' circuit boards; LimX does not describe them.LimX's model gives this motor a gearbox ratio of 21.1765:1; the gear type is not published.LimX's model gives this motor a gearbox ratio of 21.391:1; the gear type is not published.LimX's model gives this motor a gearbox ratio of 21.391:1; the gear type is not published.LimX's model gives this motor a gearbox ratio of 28.1716:1; the gear type is not published.Magnet wire is drawn from rod of pure electrolytic copper: Elektrisola starts from 8 mm rod with at least 99.90% copper, and most magnet wire is fully annealed, electrolytically refined copper (Elektrisola; Wikipedia).Small DC and brushless motors' coils are wound from magnet wire, usually copper (Wikipedia); maxon says its coreless windings are enamelled copper wire, a copper core with lacquer insulation (maxon). Nidec does not say what wire its coils use.DUV machines, which ASML also makes, print most of the layers in microchips, and ASML's EUV machines (the NXE:3800E) are being adopted by advanced DRAM makers (ASML annual report 2025).ASML's DUV machines, 'the workhorses of the industry', print the majority of layers in chips, older-generation chips included (ASML annual report 2025).A five-finger hand with 6 DoF (BrainCo, per LimX's brochure): standard on the Creator edition (创作版) and optional on the other edition (创享版) in LimX's Chinese table, optional in its English table. Every Luna also comes with fixed palm-shaped and fist-shaped hands.The frame, shells and knit fabric panels, visor, hands, shoes and linkage rods that make up the LimX Luna's body.Eight joint motors of this size: hip pitch, roll and yaw and the knee in each leg (LimX's model).Thirteen joint motors of this size: two per ankle, three at the waist, three per shoulder (LimX's model).Two joint motors of this size: the elbows (LimX's model).Four joint motors of this size: the head turn and nod and both wrists (LimX's model).Slide-out 10,000 mAh battery modules: one with the 创享版 edition, two with the 创作版 (LimX).Two Rockchip RK3588 computers, for motion control and for perception (LimX).An RGB camera (LimX's table).A 6-axis IMU of LimX's own design (LimX's table), at the pelvis in LimX's model.A face screen behind the visor ('Facial Interaction Screen', LimX).Microphones for voice dialogue (LimX's table).A speaker (LimX's table).Air cooling of the main control area (LimX's table: 'Main Control Air Cooling'), which needs fans and heat sinks.LimX Dynamics makes Luna.Quartz and silica sandQuartz and silica sandMagnesium ores and brinesMagnesium ores and brinesLithography machines (chipprinting)Lithography machines (chip printing)Mature-node chipfabrication (28 nm and…Mature-node chip fabrication (28 nm and older; analog and sensor chips)Memory chip fabrication(DRAM)Memory chip fabrication (DRAM)Aluminium alloysAluminium alloysCopper smelting andrefiningCopper smelting and refiningAlumina refining andaluminium smeltingAlumina refining and aluminium smeltingCopper miningCopper miningBauxite miningBauxite miningMagnesium smeltingMagnesium smeltingSilicon metal smeltingSilicon metal smeltingChip packaging and test(OSAT)Chip packaging and test (OSAT)Precision reduction gears(heavy robot joints)Precision reduction gears (heavy robot joints)Small precision motors (DCand BLDC)Small precision motors (DC and BLDC)Processors (CPUs and SoCs)Processors (CPUs and SoCs)Memory chips (DRAM /LPDDR)Memory chips (DRAM / LPDDR)Image sensorsImage sensorsIMUs (motion sensors)IMUs (motion sensors)Tactile sensorsTactile sensorsCameras and depth camerasCameras and depth camerasNickel miningNickel miningNickel smelting andrefiningNickel smelting and refiningTitanium minerals(ilmenite and rutile)Titanium minerals (ilmenite and rutile)Soft covers (textiles,foams, soft polymer skins)Soft covers (textiles, foams, soft polymer skins)Tin miningTin miningLead miningLead miningSilver miningSilver miningPalladium mining(platinum-group metals)Palladium mining (platinum-group metals)Antimony miningAntimony miningBromine (from brines)Bromine (from brines)Barite mining (barium)Barite mining (barium)Indium refining (zincby-product)Indium refining (zinc by-product)Solder (tin alloys:lead-free SAC and…Solder (tin alloys: lead-free SAC and tin-lead)Copper-clad laminate (FR-4glass-fibre epoxy board…Copper-clad laminate (FR-4 glass-fibre epoxy board material)Printed circuit boards(bare boards)Printed circuit boards (bare boards)Multilayer ceramiccapacitors (MLCC)Multilayer ceramic capacitors (MLCC)Connectors and wiringharnessesConnectors and wiring harnessesDisplays (LCD and OLEDscreens)Displays (LCD and OLED screens)Electronics assembly(circuit boards with part…Electronics assembly (circuit boards with parts soldered on)Zinc miningZinc miningBrass (copper-zinc alloy)Brass (copper-zinc alloy)Copper magnet wire(enamelled)Copper magnet wire (enamelled)Dexterous handsDexterous handsMicrophonesMicrophonesSmall speakersSmall speakersCooling fans and heatsinksCooling fans and heat sinksLimX DynamicsLimX DynamicsLimX LunaLimX LunaStructure: LimX LunaStructure: LimX LunaLimX joint motor, 200 N·m(Luna)LimX joint motor, 200 N·m (Luna)LimX joint motor, 70 N·m(Luna)LimX joint motor, 70 N·m (Luna)LimX joint motor, 30 N·m(Luna elbows)LimX joint motor, 30 N·m (Luna elbows)LimX joint motor, 15.8 N·m(Luna neck and wrists)LimX joint motor, 15.8 N·m (Luna neck and wrists)Luna battery module(10,000 mAh, charged at…Luna battery module (10,000 mAh, charged at 58.8 V)Luna computers (twoRockchip RK3588 boards)Luna computers (two Rockchip RK3588 boards)