humanoidrobot

Leju Robotics Kuavo-5 — Näitajad, hind ja kust osta (2026)

The Kuavo-5 is a full-body humanoid robot by Leju Robotics (Shenzhen, China). It features 40 degrees of freedom, including 14 hand DOF, driven by self-developed joint modules with reinforcement-learning locomotion. Pricing is undisclosed; the robot is available by pre-order. Specs include 168 cm height, 55 kg weight, 7-hour battery life, and 5 km/h max speed. It targets research, education, and service roles. No used market exists yet as the model is in early pre-order phase.

💰Hind
$90 000
📅Esmakordselt ehitatud
2025
🌍Päritolu
CN
📏Kõrgus
168 cm
⚖️Kaal
55 kg
🦾Vabadusastmed
40
🏃Maks. kiirus
5 km/h
📦Kandevõime
5 kg
🔋Aku
7 hours
🛒Saadavus
Ettetellimine

What is the Leju Kuavo 5?

The Leju Kuavo-5 is a fifth-generation bipedal humanoid robot developed by Suzhou Leju Robotics Co., Ltd., based in Shenzhen, China. Designed as an open platform for humanoid robotics research, it features 40 degrees of freedom (26 in the body, 14 in the hands) with dexterous 5-finger hands. Locomotion is governed by a reinforcement-learning controller, enabling walking, stair climbing, and gentle slopes. The robot is equipped with Intel RealSense cameras, wrist-mounted cameras, and optional LiDAR, running on Ubuntu 22.04 with ROS 2 Humble. It competes in the mid-size humanoid space against models like Unitree H1 and Fourier GR-2, positioning itself as a cost‑conscious platform for academic labs, corporate R&D teams, and service-robot developers.

Specifications

Here are the full technical specifications.

SpecValue
Height168 cm
Weight55 kg
Degrees of freedom40
Battery life7 hours
Max speed5 km/h
Payload5 kg (per hand)
Price (new)Undisclosed (contact manufacturer)
Price (used range)N/A

Price & Value

New MSRP: Undisclosed (contact manufacturer)

Used range: N/A

Leju has not published a fixed retail price for the Kuavo-5; interested buyers must contact the manufacturer directly, though early Chinese market indicators suggest educational/institutional pricing arrangements. Compared to the Unitree H1 at approximately $90,000, the Kuavo-5 may undercut or match that figure thanks to China's supply chain advantages. Because the robot is a pre-order research platform, there is no used market and no depreciation history. As with all pre‑commercial humanoids, total cost of ownership must account for software licensing, ongoing maintenance, and potential add‑on sensors like LiDAR. For budget‑conscious labs, the Kuavo-5 represents an attractive proposition if the final price lands below the H1, but buyers should request a formal quotation including support packages before budgeting.

Who Is It For?

Best for: - University robotics labs (40 DOF enables dexterous manipulation research with 5-finger hands) - Corporate R&D teams exploring humanoid teleoperation and RL locomotion (ROS 2 + NVIDIA Jetson Orin NX) - Service-robot developers needing a mobile, dual-arm platform for reception, guided tours, and light logistics

Not for: - Heavy industrial lifting or palletizing (arm payload limited to 5 kg per hand) - Outdoor all‑terrain deployment (no published IP rating, max slope ~10°) - Production floor use requiring real‑time safety certification (no known ISO 10218 or collaborative‑safety rating)

Alternatives & Comparison

The Kuavo-5 sits in the rapidly expanding mid‑tier humanoid market, competing directly with the Unitree H1, Fourier GR-2, and anticipated Tesla Optimus. Each robot offers trade‑offs in dexterity, speed, payload, and software maturity.

ModelPriceAvailableKey Difference
Unitree H1~$90,000yesH1 is faster and more acrobatic but uses basic 3‑finger hands; Kuavo‑5 has 5‑finger dexterous hands for fine manipulation.
Fourier GR-2~$400,000preorderGR‑2 has higher payload (50 kg) and advanced perception, but is heavier and costs several times more.
Tesla Optimus Gen 2UndisclosednoExpected to be lower cost and full‑body dexterous, but not yet commercially available; Kuavo‑5 is buyable now (pre‑order).

Verdict: For labs that value dexterous hands and an open‑source software stack at a (likely) reasonable price, the Kuavo‑5 is the smartest bet. The Unitree H1 wins if acrobatic locomotion is the priority, while the Fourier GR-2 suits high‑payload industrial tasks. Tesla Optimus remains an unproven future competitor. As of 2026, the Kuavo‑5 offers the best balance of hand dexterity and accessible pricing in the pre‑order market.

Use Cases & Capabilities

Humanoid robotics research

With 40 DOF – including 14 in the hands – the Kuavo‑5 provides a physically capable platform for studying full‑body control, reinforcement‑learning locomotion, and dexterous manipulation. Its ROS 2 Humble ecosystem and Jetson Orin NX compute enable rapid algorithm deployment, while the optional LiDAR and force‑torque sensors permit sensor‑fusion experiments. Researchers can test state‑of‑the‑art learning‑based controllers directly on hardware, moving beyond simulation.

Education platform

Universities and technical institutes can use the Kuavo‑5 as a classroom tool for humanoid robotics, mechatronics, and AI courses. Students gain hands‑on experience with bipedal walking, object grasping, and teleoperation via a modern robot that mirrors industrial humanoid designs. The dual‑boot Ubuntu environment and open API lower the barriers for undergraduate and graduate projects, though the pre‑order lead time requires planning around academic calendars.

Service and hospitality

The Kuavo‑5 can be deployed for reception, guided tours, and light logistics in corporate lobbies, museums, or trade shows. Its 5‑fingered hands allow natural hand gestures and simple object hand‑offs, while a walking speed of up to 5 km/h matches indoor guide speeds. Teleoperation features enable remote monitoring and human‑in‑the‑loop assistance for complex interactions, though limited payload means it cannot carry heavy giveaways or equipment.

History & Background

Leju Robotics (Suzhou Leju Robotics Co., Ltd.) was founded in 2016 in Shenzhen, China, and quickly established itself as a humanoid robot specialist. The company introduced its first Kuavo model in 2023 as a research platform. It was followed in 2024 by the Kuavo‑3 and Kuavo‑3C, which refined the hardware and introduced more advanced joint modules. In August 2024, Leju unveiled the fifth‑generation Kuavo‑5 at major tech events, claiming 40 degrees of freedom and a reinforcement‑learning locomotion controller. The robot was positioned as a pre‑order product for universities, research institutes, and service‑robot companies. As of 2026, Kuavo‑5 remains in limited pre‑order status, with early units reportedly delivered to academic partners in China. Leju continues to iterate while building an ecosystem around the open‑source ROS 2 platform.

Buying Used — What to Check

Verify software licenses and ROS 2 support As a pre‑order platform, used units may have incomplete or outdated ROS packages; confirm the ROS 2 Humble image and any custom drivers are included.

Inspect hands and joint play The dexterous 5‑finger hands are the main differentiator; excessive backlash or missing finger segments can severely limit research utility.

Request battery cycle count With a claimed 7‑hour runtime, an aged battery may degrade fast; a factory‑swappable design helps, but battery packs for used units may be hard to source.

Korduma kippuvad küsimused

Leju Robotics has not published a fixed retail price. Early Chinese market estimates peg the Kuavo‑5 between 600,000–800,000 RMB (~$82,000–110,000), but final pricing depends on configuration, support level, and quantity. Contact the manufacturer directly for a quotation.
The robot walks at up to 5 km/h, climbs stairs (up to ~10° slope), and uses 5‑fingered dexterous hands to grasp objects up to 5 kg per hand. It supports teleoperation and runs reinforcement‑learning locomotion controllers. Pre‑loaded ROS 2 Humble lets researchers develop complex manipulation and navigation behaviors.
Yes, the Kuavo‑5 is available on pre‑order direct from Leju Robotics. Contact sales@lejurobot.com (or regional distributors) with your use case; typical response time is 48 hours. No reseller or retailer stocks the robot as of 2026.
The Unitree H1 is faster (max speed ~12 km/h) and features dynamic acrobatics but uses basic 3‑finger grippers. The Kuavo‑5 offers 5‑finger dexterous hands (14 hand DOF) better suited for manipulation research, at a likely lower price point, while sacrificing outright locomotion speed and ruggedness.
Height: 168 cm, Weight: 55 kg, Degrees of freedom: 40 (body 26 + hands 14), Battery life: 7 hours, Max speed: 5 km/h, Payload: 5 kg per hand. Compute: Intel Core i7-1265U + NVIDIA Jetson Orin NX, running Ubuntu 22.04 and ROS 2 Humble.
Suzhou Leju Robotics Co., Ltd., founded in 2016 and headquartered in Shenzhen, China, specializes in full‑body humanoid robots. The company previously released the Kuavo, Kuavo‑3, and Kuavo‑3C before launching the fifth‑generation Kuavo‑5 in 2024.
The Kuavo‑5 is rated for up to 7 hours of normal operation. The battery is designed to be swappable, allowing quick field changes. Charging time has not been officially disclosed by Leju.
Primary target sectors are education (university labs), robotics research institutes, and service industries for reception, guided tours, and teleoperated tasks. It is not intended for heavy industrial manufacturing or outdoor agriculture.

Leju Kuavo 5 in 3D

Loading the 3D model…
Drag to rotate · click the model, then scroll or pinch to zoom · click a part to inspectSwipe sideways to turn · pinch to zoom · tap a part to inspect3D model credit and licence

Leju Kuavo 5 supply chain

Point at or select a step to light up its chain: bright lines are its direct links, softer lines the rest of the path from raw material to robot.

Swipe sideways to follow the whole chain.

ExtractionRefiningMaterialsComponentsModulesRobotsCompaniesLithium compounds (carbonate, chloride, hydroxide) are produced from mined lithium.Lithium is produced from brine and mineral operations.Mined copper is smelted and refined.Primary aluminium from smelters.Bauxite is refined to alumina for aluminium.6061 aluminium contains 0.8–1.2% magnesium.6061 aluminium contains 0.40–0.8% silicon.A lithium-ion cell has a cathode (positive electrode), typically a metal oxide or phosphate. IEA tracks the 2025 mix of LFP and nickel-based cathodes in electric-car batteries.Camera units are built around image sensors (CMOS image sensors from makers such as Sony and OmniVision).Silicon metal is made from silica in natural forms such as quartzite (USGS).Silicon metal can be refined further into ultra-high-purity semiconductor-grade silicon, called polysilicon (USGS). Chips are made on wafers: thin slices of crystalline silicon (Wikipedia).Magnesium is recovered from dolomite, serpentine, magnesium-bearing evaporite minerals and brines (USGS).In wire-bond packaging, fine gold or copper wire connects each die to its leadframe or substrate. ASE is gradually replacing gold wire with copper to cut material cost, though gold wire is still one of its main materials.Steel is made from iron ore: US mines shipped 98% of their usable iron ore to the steel industry (USGS).Sony makes its CMOS image sensors in its own production facilities in Japan (Nagasaki, Kumamoto). SIA/BCG count optoelectronics and sensors in one fab group with discrete and analog chips (DAO), apart from logic.Bosch makes its MEMS sensors in its own fabs in Reutlingen and Dresden; a MEMS sensor is a MEMS element plus an evaluation chip (ASIC).A MEMS sensor is packed in a semiconductor housing, such as an LGA package (Bosch).Mined cobalt is refined further into chemicals or metal (Cobalt Institute). In 2025 DR Congo's export restrictions left refiners short of cobalt hydroxide feed and forced some to limit production, though world refined output still rose 5% to 240 kt (Cobalt Institute).Cobalt sulphate, the largest refined cobalt product, is typically used in NCM (NMC) batteries, and cobalt tetroxide often in LCO batteries (Cobalt Institute). Cobalt-free substitutes that use iron and phosphorus (LFP) held a significant market share in China (USGS).Mined nickel ore and concentrate go to smelters and refineries. In Indonesia, laterite ore is processed into nickel pig iron and ferronickel for stainless steel, or into battery intermediates such as mixed hydroxide precipitate (IEA); the US Eagle Mine's concentrate is exported to smelters (USGS).Battery cathodes need nickel sulphate, made from Class I nickel metal or from intermediates such as mixed hydroxide precipitate and nickel matte (IEA). LFP (lithium iron phosphate) cathodes contain no nickel.Stainless steel is the biggest use of nickel, 66% of demand in 2025 (Cobalt Institute). In the US, stainless and alloy steels and nickel alloys take more than 85% of nickel use (USGS). The world made 64.2 Mt of stainless steel in 2025 (worldstainless), against about 1,900 Mt of raw steel (USGS).Lithium-ion cathodes are lithium compounds, generally a layered oxide (such as lithium cobalt oxide), a phosphate (lithium iron phosphate) or a spinel (lithium manganese oxide). Batteries took an estimated 88% of world lithium in 2025 (USGS).Natural graphite flakes must be made into spherical particles, purified to over 99.95% carbon and coated before they can be used in lithium-ion battery anodes (IEA). Natural graphite is now a small part of anode supply: under 8% of China's 2025 anode shipments (GGII), and about 14% worldwide in 2022 (Rystad).Synthetic graphite is made by calcining and graphitising petroleum coke or needle coke at nearly 3,000 °C (IEA). It was 92.7% of China's 2025 anode shipments (GGII).The negative electrode (anode) of a conventional lithium-ion cell is typically graphite. IEA's 2025 data on electric-car battery anodes show only graphite and silicon-doped graphite.Solder is the largest use of tin, 51% of world tin use in 2023 (International Tin Association; in the US solder took 11%, USGS). The common lead-free alloy SAC305 is 96.5% tin (AIM).Tin-lead solder is nearly half lead (PubChem), but the electronics industry has moved toward lead-free solders (USGS): 92% of solder for electronics was lead-free in 2023 (ITA).The lead-free alloy SAC305 contains 3% silver (AIM). In the US, brazing and solder took 3% of silver (USGS).The lead-free alloy SAC305 contains 0.5% copper (AIM).FR-4 laminate is woven fibreglass cloth with an epoxy binder (Wikipedia), and fibreglass is made from silica sand (Covia).A thin layer of copper foil is laminated to one or both sides of an FR-4 panel; these are called copper-clad laminates (Wikipedia; ChinaBaogao).FR-4 epoxy resin systems typically use bromine to resist fire (Wikipedia); a grade of the brominated flame retardant TBBPA is used to make epoxy resins for circuit boards (Wikipedia). Brominated flame retardants are one of bromine's two leading uses (USGS).Barite is used to make barium carbonate, which goes into dielectrics (Wikipedia). Barium titanate, the dielectric ceramic used in capacitors, can be made by heating barium carbonate with titanium dioxide (Wikipedia).Barium titanate, the ceramic in high-capacitance MLCCs, can be made by heating barium carbonate with titanium dioxide (Wikipedia); titanium dioxide comes from ilmenite and rutile (USGS).99% of MLCCs made worldwide use base-metal electrodes of nickel or copper; the industry moved from palladium and silver to cut cost (NASA, 2015). TDK replaced palladium electrodes with nickel in 1993 (Wikipedia).Platinum-group metals are used in multilayer ceramic capacitors (USGS). High-reliability MLCCs use palladium-silver electrodes (NASA, 2015).High-reliability MLCCs use precious-metal electrodes of palladium and silver (NASA, 2015).Connector contacts are copper alloys: beryllium copper is called the best copper alloy for contacts, connectors and cables (Wikipedia), and phosphor bronze (copper-tin-phosphorus) can replace it (USGS).Copper-clad laminate is the core material of circuit boards (ChinaBaogao); FR-4 is a common material for printed circuit boards (Wikipedia).Parts are soldered onto bare boards: Adafruit's BNO055 board is a "breakout PCB", and the Raspberry Pi Zero 2 W brief warns against damage to the printed circuit board.SAC305 lead-free solder is made for soldering printed circuits, by wave, hand and SMT reflow soldering (Conro; AIM).MLCCs store and release charge and absorb noise in phones, home appliances and IoT devices (Murata). The Raspberry Pi's RP3A0 package includes the decoupling capacitors that smooth its supply voltage (Raspberry Pi).Boards carry connectors: the Raspberry Pi Zero 2 W brief speaks of the board and its connectors, and Waveshare's servo adapter has a USB-C connector and a power connector.NVIDIA's Jetson Thor modules are 100 × 87 mm and plug in through a 699-pin board-to-board (B2B) connector (NVIDIA).Built-in IMU, model ICM40609 (Livox).Brass is copper and zinc: CW614N free-cutting brass is about 39% zinc. In the US, brass and bronze are the second use of zinc after galvanized steel.Brass is mostly copper: 57–59% in CW614N free-cutting brass.Free-cutting brass such as CW614N holds 2.5–3.5% lead so it machines cleanly; lead-free brasses exist.XT30 battery plugs (G1 harness, Open Duck Mini) have gold-plated brass contacts.Antimony is used in circuit boards to cut flammability further. A review lists two studies of scrap PC boards, parts and solder still on, with 0.45% and 1.97% antimony, so the share in the laminate alone is not known.Seven micro brushless joint motors in each Dex3-1 (Unitree's F-1515 series, 45 g each): six drive their joints directly, one through gears (Unitree).The Dex3-1's tactile version has 33 pressure sensors in 9 arrays (palm, finger pads and fingertips) that feel from 10 g to 2,500 g (Unitree). Unitree makes them an option.MEMS microphones are silicon chips: the diaphragm is etched into a silicon wafer (Wikipedia). Pollen's HAT uses a MEMS microphone.Leju's Kuavo 5 page labels the shin aluminium alloy and steel (铝合金 钢材); the rest of the frame's material is not published (probably mostly aluminium alloy).Leju's Kuavo 5 page labels the shin aluminium alloy and steel (铝合金 钢材); which parts are steel is not stated (pins, shafts and screws probably are).Leju: a battery of 60 V and 6 Ah (lithium-ion cells, estimate; their maker is not stated).Leju's sheet: Intel Core Ultra 7 Processor 255H.The AAEON GENE-MTH6 board (Leju's sheet).Leju: its integrated joints use a reducer whose structure it improved for back-drivability and force control (sponsor letter); its sponsor letter also lists a self-developed quasi-direct-drive cycloidal pin-wheel joint; which Kuavo 5 joints use it is not stated.Each joint carries a temperature sensor (Leju's sheet) and is driven by Leju's control code, so it has circuit boards.Leju: its integrated joints use a reducer whose structure it improved for back-drivability and force control (sponsor letter); its sponsor letter also lists a self-developed quasi-direct-drive cycloidal pin-wheel joint; which Kuavo 5 joints use it is not stated.Each joint carries a temperature sensor (Leju's sheet) and is driven by Leju's control code, so it has circuit boards.Leju's gripper runs on 24–60 V and talks CAN, so it has a driver board.Magnet wire is drawn from rod of pure electrolytic copper: Elektrisola starts from 8 mm rod with at least 99.90% copper, and most magnet wire is fully annealed, electrolytically refined copper (Elektrisola; Wikipedia).Small DC and brushless motors' coils are wound from magnet wire, usually copper (Wikipedia); maxon says its coreless windings are enamelled copper wire, a copper core with lacquer insulation (maxon). Nidec does not say what wire its coils use.ASML's DUV machines, 'the workhorses of the industry', print the majority of layers in chips, older-generation chips included (ASML annual report 2025).The frames, shells and covers that make up the Kuavo 5's body.The upper computer: an NVIDIA Jetson Orin NX (8 GB) on the advanced edition; the MaxA, MaxB and showroom editions use a Jetson AGX Orin (Leju's sheets).An Orbbec Gemini-335L depth camera in the head, and a waist camera (Leju's sheet and diagram).A Mid-360 LiDAR at the neck, just below the head (Leju's product sheet and its labelled diagram).An IMU in the pelvis (Leju's sheet and diagram).A 6-microphone array for 360° sound location (Leju's sheet).Stereo speakers in the chest (Leju's sheet and diagram).The Max A and Max B editions have 6-DoF dexterous hands (Max B's with touch sensing); their sheets point to BrainCo's hand manual. The advanced edition has Leju's own two-finger grippers.The motion-control board and the power board in the torso (Leju's sheet).Leju (Shenzhen) Robotics makes the Kuavo 5. It has combined outsourced processing with its own final assembly, in leased production space in Longhua, Shenzhen, and in Wujiang, Suzhou (its Jiangsu subsidiary). Since March 2026 Dongfang Yuanqi, a Foshan subsidiary of Dongfang Precision in which Leju holds 20%, builds whole robots for Leju, mainly Kuavo 5s, and Leju expects its full-size robots to be made mainly there for some time.Thirteen PA-series joint modules in the legs and waist (Leju's configuration).Sixteen 'Ruiwo' joint modules in the arms, wrists and neck (Leju's configuration).Two of Leju's two-finger grippers, standard on the advanced edition.Swappable batteries in the chest (Leju: 60 V, 6 Ah).The lower computer: an AAEON GENE-MTH6 board with an Intel Core Ultra 7 255H (Leju's sheet). AAEON's own page lists the GENE-MTH6 only with Core Ultra Series 1 chips, such as the 155H, so the board or chip name on Leju's sheet may be off.Quartz and silica sandQuartz and silica sandMagnesium ores and brinesMagnesium ores and brinesOil, gas and coal(plastics feedstock)Oil, gas and coal (plastics feedstock)Steel (gear, bearing andstainless grades)Steel (gear, bearing and stainless grades)Lithography machines (chipprinting)Lithography machines (chip printing)Mature-node chipfabrication (28 nm and…Mature-node chip fabrication (28 nm and older; analog and sensor chips)Aluminium alloysAluminium alloysBattery-grade lithiumcompoundsBattery-grade lithium compoundsLithium chemicalconversionLithium chemical conversionCopper smelting andrefiningCopper smelting and refiningAlumina refining andaluminium smeltingAlumina refining and aluminium smeltingLithium miningLithium miningCopper miningCopper miningBauxite miningBauxite miningIron ore miningIron ore miningMagnesium smeltingMagnesium smeltingSilicon metal smeltingSilicon metal smeltingChip packaging and test(OSAT)Chip packaging and test (OSAT)Precision reduction gears(heavy robot joints)Precision reduction gears (heavy robot joints)Small precision motors (DCand BLDC)Small precision motors (DC and BLDC)Processors (CPUs and SoCs)Processors (CPUs and SoCs)Image sensorsImage sensorsIMUs (motion sensors)IMUs (motion sensors)Tactile sensorsTactile sensorsLithium-ion cellsLithium-ion cellsAI compute modulesAI compute modulesCameras and depth camerasCameras and depth camerasCobalt miningCobalt miningCobalt refining (chemicalsand metal)Cobalt refining (chemicals and metal)Nickel miningNickel miningNickel smelting andrefiningNickel smelting and refiningNatural graphite miningNatural graphite miningBattery anode graphite(spherical natural and…Battery anode graphite (spherical natural and synthetic)Cathode active material(NMC, NCA, LCO, LFP)Cathode active material (NMC, NCA, LCO, LFP)Titanium minerals(ilmenite and rutile)Titanium minerals (ilmenite and rutile)Tin miningTin miningLead miningLead miningSilver miningSilver miningPalladium mining(platinum-group metals)Palladium mining (platinum-group metals)Antimony miningAntimony miningBromine (from brines)Bromine (from brines)Barite mining (barium)Barite mining (barium)Solder (tin alloys:lead-free SAC and…Solder (tin alloys: lead-free SAC and tin-lead)Copper-clad laminate (FR-4glass-fibre epoxy board…Copper-clad laminate (FR-4 glass-fibre epoxy board material)Printed circuit boards(bare boards)Printed circuit boards (bare boards)Multilayer ceramiccapacitors (MLCC)Multilayer ceramic capacitors (MLCC)Connectors and wiringharnessesConnectors and wiring harnessesElectronics assembly(circuit boards with part…Electronics assembly (circuit boards with parts soldered on)Livox Mid-360 3D LiDARLivox Mid-360 3D LiDARZinc miningZinc miningBrass (copper-zinc alloy)Brass (copper-zinc alloy)Copper magnet wire(enamelled)Copper magnet wire (enamelled)Dexterous handsDexterous handsMicrophonesMicrophonesSmall speakersSmall speakersLeju RoboticsLeju RoboticsLeju Kuavo 5Leju Kuavo 5Structure: Leju Kuavo 5Structure: Leju Kuavo 5Leju leg and waist jointmodules (PA series, Kuavo…Leju leg and waist joint modules (PA series, Kuavo 5)Leju arm, wrist and neckjoint modules ('Ruiwo'…Leju arm, wrist and neck joint modules ('Ruiwo' series, Kuavo 5)Leju two-finger gripper(Kuavo 5)Leju two-finger gripper (Kuavo 5)Kuavo 5 swappable battery(60 V, 6 Ah)Kuavo 5 swappable battery (60 V, 6 Ah)Kuavo 5 lower computer(AAEON GENE-MTH6, Intel…Kuavo 5 lower computer (AAEON GENE-MTH6, Intel Core Ultra 7 255H)

Fotod2

Leju Robotics Kuavo-5 photo 1
Leju Robotics Kuavo-5 photo 2