The CR20AP is the strongest arm in Dobot's CRA-IP68 series: 20 kg of payload and a 1,700 mm working radius inside an IP68 sealed arm. It is made for heavy, repetitive jobs in dirty places, such as stacking cases at the end of a line that is hosed down every shift, loading heavy blanks into CNC machines that spray coolant, or moving castings through dust.
Dobot pressurises the inside of the arm so that positive pressure pushes outward against the seals. The CC263 control cabinet runs on 100 to 240 V AC and is rated IP54, with 24 digital inputs, 24 digital outputs, 2 analogue inputs and 2 analogue outputs, Ethernet with TCP/IP, Modbus TCP, EtherNet/IP and PROFINET, RS485 with Modbus RTU, USB and an ABZ encoder input.
At the flange there is more I/O than on the smaller IP68 models: four digital inputs, four digital outputs and four analogue inputs, shared with RS485, enough to run a gripper, a vacuum tool and a sensor without cable runs along the arm. Repeatability is ±0.05 mm and maximum linear speed 2 m/s. J3 turns ±165° and the other joints ±360°, with J1 and J2 at 120°/s, J3 at 150°/s and the wrist at 180°/s.
The arm weighs 73 kg, draws 500 W, connects over a 6 m cable and mounts upright on a floor or desk base, so a rigid, well-anchored pedestal is essential at this reach. It is not designed for permanent use under water, and the IP54 cabinet should be kept out of direct spray.
Key Capabilities
-
20 kg across 1,700 mm: The highest payload and longest reach in the IP68 series cover a full pallet or two machines from one position.
-
Sealed to IP68: The arm resists dust, water, coolant and oil, so it works in wet processing areas and dusty plants without a cover.
-
Internal pressurisation: Positive pressure inside the arm helps keep contaminants out during long shifts.
-
Four-channel tool I/O: Four DI, four DO and four AI at the flange, shared with RS485, run grippers, vacuum tools and sensors without extra cabling.
-
IP54 CC263 controller: The cabinet connects to PLCs over PROFINET, EtherNet/IP, Modbus TCP or Modbus RTU.
-
Taught by hand or by script: Hand guiding, graphical blocks and scripting are all supported, from a PC, an Android app or a teach pendant.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.