The CR12A balances payload and reach in the upper half of Dobot's CRA series: 12 kg over a 1,200 mm reach from a 39.5 kg arm. That combination suits machine tending with double grippers, case handling, palletizing of lighter cartons and the transfer of heavier parts between stations.
Repeatability is ±0.03 mm and maximum TCP speed 2 m/s. Against the CR16A, which carries 16 kg over a shorter 1,000 mm reach, the CR12A gives up 4 kg of payload for 200 mm of extra reach.
The controller connects to plant systems over two WAN ports carrying TCP/IP, Modbus TCP, EtherNet/IP and PROFINET, an RS-485 port for Modbus RTU and built-in Wi-Fi. It runs on single-phase 100 to 240 V AC at 47 to 63 Hz, and the arm draws 350 W.
The arm is rated IP54, works from 0 to 50 °C and is built from aluminium alloy and ABS. A 39.5 kg arm working at 1,200 mm needs a rigid stand or pedestal, specified with the order.
Key Capabilities
-
12 kg over 1,200 mm: Payload and reach for double grippers, cases and heavier parts moved between stations.
-
±0.03 mm repeatability: Placement stays consistent across the larger envelope.
-
More reach than the CR16A: The CR12A trades 4 kg of payload for 200 mm of extra reach.
-
Four industrial protocols: TCP/IP, Modbus TCP, EtherNet/IP and PROFINET on two WAN ports, Modbus RTU over RS-485 and Wi-Fi.
-
Single-phase supply: The controller takes 100 to 240 V AC at 47 to 63 Hz and the arm draws 350 W.
-
IP54 arm: Rated for dust and splash exposure, from 0 to 50 °C.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.