The CR 30HT is the Touch Edition of Dobot's 30 kg CR 30H cobot. It adds torque sensors built into the joints, which Dobot rates at 0.1% F.S. accuracy, and with them one-hand drag-to-teach and an instant response when the arm detects a collision. It is the edition for heavy-payload cells where positions change often and operators teach them by hand.
That is the whole difference from the CR 30H Standard Edition: the same 30 kg payload and 1,800 mm reach, with the torque sensing the Standard Edition leaves out. The sensors add 2 kg, so the Touch Edition weighs 102 kg against 100 kg.
The arm repeats to ±0.05 mm. Its wrist joints turn at up to 300°/s, J1 and J2 at 150°/s and J3 at 200°/s, and Dobot gives a maximum TCP speed of 6 m/s. J3 moves ±163° and the other joints ±360°. Floor, wall and ceiling mounting are supported, the arm is rated IP65, and a 6 m cable runs from the base to the control cabinet.
The cabinet takes single-phase 200 to 240 V AC and carries 24 DI and 24 DO, analogue I/O, 10 safety inputs and outputs and two Ethernet ports for TCP/IP, Modbus TCP, EtherNet/IP and PROFINET. The flange supplies 0, 12 or 24 V tool power at 2 A continuous and 3 A peak. Torque-based collision response does not replace the risk assessment of the cell.
Key Capabilities
-
Torque sensors in the joints: Built-in joint torque sensors, rated by Dobot at 0.1% F.S. accuracy, let the arm feel external forces along its length.
-
One-hand drag-to-teach: Operators guide the heavy-payload arm by hand to teach new positions quickly.
-
Instant collision response: The torque sensing lets the robot react as soon as a collision is detected.
-
Same 30 kg and 1,800 mm: Payload and reach match the Standard Edition, so the choice comes down to how the cell is taught and guarded.
-
300°/s wrist joints: J4 to J6 turn at up to 300°/s for short cycle times.
-
Floor, wall or ceiling: Three mounting orientations fit the arm to the cell.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.