The CR10AS is the largest of Dobot's SafeSkin cobots: a 10 kg arm with a 1,300 mm working radius and 1,525 mm maximum reach, wrapped on its outer joints in a sensing skin that stops the robot before a person touches it. It brings pre-collision sensing to jobs that need a heavier gripper and a longer reach, such as machine tending, case handling and end-of-line work beside operators.
SafeSkin sits on J4, J5 and J6 and detects people and objects at 5 to 15 cm, depending on position. The sensing cycle is 0.01 s and an emergency stop executes within 0.1 s. Conductive targets such as the human body and metal are sensed best, non-conductive items less so.
The arm weighs 40 kg and repeats to ±0.03 mm, with a maximum linear speed of 2 m/s. J3 turns ±160° and every other joint ±360°; J1 and J2 reach 150°/s and J3 180°/s. It runs at 48 V DC, draws 350 W, is rated IP54 and works from 0 to 50 °C.
Against the smaller SafeSkin models, the CR10AS doubles the CR5AS payload and adds 400 mm of working radius, at 40 kg of arm instead of 25 kg. Plan a rigid base for it, and keep gripper and part together within 10 kg.
Key Capabilities
-
10 kg with pre-collision sensing: The heaviest payload in Dobot's SafeSkin range, for grippers, vacuum tools and parts a 5 kg arm cannot carry.
-
1,300 mm working radius: The arm serves a machine and an infeed or outfeed station from one base, with a maximum reach of 1,525 mm.
-
Stops before contact: SafeSkin on the outer joints senses a person 5 to 15 cm away and halts the arm, with a 0.01 s sensing cycle.
-
±0.03 mm repeatability: Placement stays consistent across the larger envelope.
-
Controller I/O for a full cell: The controller carries 16 DI, 16 DO/DI, 2 AI/AO and an ABZ encoder input with TCP/IP, Modbus and Wi-Fi, and the flange has two DI, two DO and two AI with RS485.
-
IP54, 0 to 50 °C: The arm is protected against dust and splashes and runs in ambient temperatures up to 50 °C.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.