The BrainCo Revo 3-21 Touch is the tactile build of BrainCo's Revo 3 dexterous robotic hand, model U21T, made as a left or a right hand. It adds a piezoresistive pressure array of 451 sensing points to the Revo 3's 21 fully active, direct-drive and backdrivable joints.
The array reads from 0 to 20 N at 0.01 N resolution and 100 Hz, and BrainCo renders it as a real-time contact heatmap, so a controller sees where an object touches the hand and how hard. Together with motor-current feedback from the backdrivable joints, that is the data contact-rich tasks need: re-gripping a tool, keeping a light hold on a fragile part, or recording tactile demonstrations for imitation and reinforcement learning. It suits robot makers and industrial research labs where a grasp has to be checked, not assumed.
Underneath, it is the full Revo 3: five joints in the thumb and four in each finger, at least 100 N grip and 25 N pinch, a 20 kg payload (5 kg on four fingers), 0.33 s open to close, 0.1° repeatability and a 10–150 mm grasp range covering BrainCo's 33 grasp patterns. It runs at 500 Hz over EtherCAT, CAN FD or RS-485 on 16–85 V, with Python and C/C++ SDKs, a ROS 2 Humble driver and URDF, MuJoCo and Isaac Sim models.
Sensing is the only difference across the Revo 3 range. The Revo 3-21 Basic (U21) has no tactile array, and the Revo 3-21 V-Touch (U21VT) pairs a 336-point palm array with visuotactile fingertips. For a Unitree H2, see the Revo 3 U21T tactile hand configured for the H2, or compare all our dexterous robotic hands.
Key Capabilities
-
451 sensing points: A piezoresistive array maps contact pressure across the hand, which BrainCo shows as a real-time contact heatmap.
-
0.01 N resolution: Each sensing point reads from 0 to 20 N in 0.01 N steps, sampled at 100 Hz.
-
21 direct-drive degrees of freedom: Five joints in the thumb and four in each finger, all active and backdrivable, so motor current also reflects contact at every joint.
-
100 N grip, 25 N pinch: The hand carries 20 kg in the whole hand or 5 kg on four fingers, and moves a joint from open to close in 0.33 s.
-
33 grasp patterns: BrainCo reports a full Kapandji opposition score and every grasp of the Feix GRASP taxonomy, on objects 10 to 150 mm across.
-
500 Hz on three buses: EtherCAT, CAN FD and RS-485 carry joint control at 500 Hz, with a separate connector for tactile data, on a 16–85 V supply.
-
Simulation and learning tools: Python and C/C++ SDKs, a ROS 2 Humble driver and URDF, MuJoCo and Isaac Sim models support sim-to-real work.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.