Rega rata-rata saben dina
Jumlah nganggo USD

Robotis · Pro Plus - PM54-060-S250-R
£1.478,28
Katrangan
Features DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module. DYNAMIXEL PRO Plus Series implements removable reduction cycloid gears, resulting in high precision and impact resistance. Torque control based on current sensing Position, Torque and Speed-based command High resolution with combination of Incremental Encoder and Contactless Absolute Encoder Full metal housing for high durability Can be used to make a full-size manipulator, pan tilt, humanoid, etc. [DYNAMIXEL PRO Plus] Upgrade Details Improved design and JST connectors applied Improved dirt inflow and leakage Improved control table (Supports X-series functions) Enhanced control performance such as responsiveness and resolution Enhanced communication responsiveness Improved heat, noise, and durability Package Components PM54-060-S250-R 1 Robot Cable-X4P 600mm 2 Wrench Bolt WB M3x8 20 Compatible Products Controller : OpenCM 485 Expansion Board, OpenCR1.0 Interface : USB2Dynamixel, U2D2 Factory Default Settings ID : 1 Baud Rate : 57600bps (User can change various settings including ID and baud rate according to environment) Caution The operational voltage is different from other DYNAMIXEL series (Operational voltage: 24V). Depending on the number of units used, it is recommended to use a separate power supply. Molex 4Pin connector is used for communication. Specification Model Name M54P-060-S250-R MCU Cortex-M4 (168 [Mhz], 32 [bit]) Input Voltage 24.0 V Performance Characteristics @24v No Load Speed 33.1 rpm No Load Current 1.25 A Continuous Operation@24v Torque [N·m] 10.1 Speed [rpm] 28.3 Current [A] 3.0 Resolution Resolution [deg/pulse] 0.0007 Step [pulse] 502,834 Angle [degree] 360 Position Sensor Contactless absolute encoder Incremental encoder Operating Temperature Min. [°C] -5 Max. [°C] 55 Motor BLDC (Maxon) Baud Rate Min. [bps] 9,600 Max. [bps] 10,500,000 Control Algorithm PID Gear Type Cycloid Gear Material Precious Metal Case Material Precious Metal Dimensions (WⅹHⅹD) [mm] 54.0 X 126.0 X 54.0 Dimensions (WⅹHⅹD) [inch] 2.13 x 4.96 x 2.13 Weight [g] 855.00 Weight [oz] 30.16 Gear Ratio 251.4 : 1 Command Signal Digital Packet Protocol Type Half duplex Asynchronous Serial Communication (8bit, 1stop, No Parity) Link (Physical) RS485 Multi Drop Bus ID 0 ~ 252 Feedback Position, Velocity, Current, Temperature, Voltage, External Port, etc Protocol version 2 Operating Mode / Angle Torque Control Mode Velocity Control Mode Position Control Mode Extended Position Control Mode PWM Control Mode Output [W] 60 Standby Current [mA] 40
Features DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module. DYNAMIXEL PRO Plus Series implements removable reduction cycloid gears, resulting in high precision and impact resistance. Torque control based on current sensing Position, Torque and Speed-based command High resolution with combination of Incremental Encoder and Contactless Absolute Encoder Full metal housing for high durability Can be used to make a full-size manipulator, pan tilt, humanoid, etc. [DYNAMIXEL PRO Plus] Upgrade Details Improved design and JST connectors applied Improved dirt inflow and leakage Improved control table (Supports X-series functions) Enhanced control performance such as responsiveness and resolution Enhanced communication responsiveness Improved heat, noise, and durability Package Components PM54-060-S250-R 1 Robot Cable-X4P 600mm 2 Wrench Bolt WB M3x8 20 Compatible Products Controller : OpenCM 485 Expansion Board, OpenCR1.0 Interface : USB2Dynamixel, U2D2 Factory Default Settings ID : 1 Baud Rate : 57600bps (User can change various settings including ID and baud rate according to environment) Caution The operational voltage is different from other DYNAMIXEL series (Operational voltage: 24V). Depending on the number of units used, it is recommended to use a separate power supply. Molex 4Pin connector is used for communication. Specification Model Name M54P-060-S250-R MCU Cortex-M4 (168 [Mhz], 32 [bit]) Input Voltage 24.0 V Performance Characteristics @24v No Load Speed 33.1 rpm No Load Current 1.25 A Continuous Operation@24v Torque [N·m] 10.1 Speed [rpm] 28.3 Current [A] 3.0 Resolution Resolution [deg/pulse] 0.0007 Step [pulse] 502,834 Angle [degree] 360 Position Sensor Contactless absolute encoder Incremental encoder Operating Temperature Min. [°C] -5 Max. [°C] 55 Motor BLDC (Maxon) Baud Rate Min. [bps] 9,600 Max. [bps] 10,500,000 Control Algorithm PID Gear Type Cycloid Gear Material Precious Metal Case Material Precious Metal Dimensions (WⅹHⅹD) [mm] 54.0 X 126.0 X 54.0 Dimensions (WⅹHⅹD) [inch] 2.13 x 4.96 x 2.13 Weight [g] 855.00 Weight [oz] 30.16 Gear Ratio 251.4 : 1 Command Signal Digital Packet Protocol Type Half duplex Asynchronous Serial Communication (8bit, 1stop, No Parity) Link (Physical) RS485 Multi Drop Bus ID 0 ~ 252 Feedback Position, Velocity, Current, Temperature, Voltage, External Port, etc Protocol version 2 Operating Mode / Angle Torque Control Mode Velocity Control Mode Position Control Mode Extended Position Control Mode PWM Control Mode Output [W] 60 Standby Current [mA] 40
Riwayat rega
Siji titik data saben dina, dirata-rata adhedhasar tanggal pangamatan.
Jumlah nganggo USD
Rata-rata diitung saben dina UTC saka kabeh rega tawaran sing kacathet.
🍪 Preferensi Cookie
Kita nggunakake cookie kanggo ngukur kinerja. Kabijakan Privasi