This is a COFDM mesh radio relay station carried by the Deep Robotics X30 or M20. Its job is to keep a link alive where there is no network to use: a robot walks into a tunnel, a basement, a damaged building or a plant with no coverage, and the relay extends the mesh behind it so video and control keep flowing back to the operator.
It works in the 1300–1500 MHz band with 5, 10 or 20 MHz carriers, adaptive BPSK, QPSK, 16QAM and 64QAM modulation, 4 W of transmit power and −100 dBm receiver sensitivity at 5 MHz. Peak capacity is 52 Mbps on a 20 MHz carrier, with an optional version rated to 92 Mbps.
The mesh itself is the point. It takes 64 nodes or more and routes over more than ten hops, in centreless, star, chain or mesh topologies, and a unit joins the network within five seconds of a warm boot. DES, AES128 and AES256 encryption are offered as options for deployments that need the traffic protected.
IP network video is accepted as standard, with HDMI or SDI input available on request. The robot supplies 12 V DC power and control, and both the controller and the software are essential to operating this payload rather than optional extras. Housing dimensions, weight and ingress rating are not published and are confirmed with the order.
Key Capabilities
-
Extends the link where there is no network: A robot-carried relay station builds out a COFDM mesh so video and control reach back to the operator from places with no coverage of their own.
-
64 nodes and more than ten hops: Published networking capacity is 64 nodes or more with routing over more than ten hops, in centreless, star, chain or mesh topologies.
-
52 Mbps peak, 92 Mbps optional: Peak capacity is 52 Mbps on a 20 MHz carrier, and an optional version is rated to 92 Mbps.
-
4 W transmit power at 1300–1500 MHz: Receiver sensitivity is −100 dBm at 5 MHz, with carrier bandwidth configurable at 5, 10 or 20 MHz.
-
Rejoins the network in five seconds: A unit joins the mesh within five seconds of a warm boot, which matters when nodes move in and out of range during a task.
-
Optional AES256 encryption: DES, AES128 and AES256 are offered as options where the traffic has to be protected.
-
Modest power budget: The station runs on DC 12 V with typical consumption at or below 21 W and peak consumption at or below 35 W.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.