The MS600-W-7 is the gas detection payload specified for the Deep Robotics X30. Mount it on the robot and the X30 becomes an atmosphere-reading platform for substations, tunnels, plant rooms, confined spaces and incident sites — the places where the first thing anyone needs to know is what is in the air.
Six gases are covered: carbon monoxide to 0.1 ppm, hydrogen sulphide and nitrogen oxides to 0.01 ppm, oxygen to 0.01 %vol, carbon dioxide to 1 ppm and combustible gas across the full 0–100 %LEL range. A temperature channel spanning −40 °C to +70 °C and a humidity channel across 0–100 %RH are built into the same unit, which matters because both affect how a gas reading should be interpreted.
The X30 supplies the payload with power and control, and the operator sees imagery and issues control through the robot's own controller and software. Nothing separate has to be carried, read or logged by hand at the scene.
The MS600-W-6 is the same sensor suite specified for the M20. Published ranges, resolutions and sensor types are identical between the two, and the suffix records which robot each is built for rather than any difference in measurement — so the choice follows your fleet. Enclosure dimensions, weight, power draw, ingress rating and calibration arrangements are unpublished and settled with the order.
Key Capabilities
-
Six-gas detection for the X30: One payload covers carbon monoxide, hydrogen sulphide, oxygen, combustible gas, carbon dioxide and nitrogen oxides.
-
0.01 ppm resolution on H2S and NOx: Both channels resolve to 0.01 ppm across a 0–100 ppm range, with carbon monoxide resolved to 0.1 ppm up to 1,000 ppm.
-
Combustible gas across the full LEL range: An industrial-grade catalytic combustion element reads 0 to 100 %LEL at 0.1 %LEL resolution.
-
Temperature and humidity in the same housing: Readings run from −40 °C to +70 °C at 0.1 °C and from 0 to 100 %RH at 1 %RH, which is the context a gas figure has to be read against.
-
Powered and controlled by the robot: The X30 supplies power and control, so the payload adds no separate battery or operating station.
-
Reporting through the X30's own interface: Imagery and control pass through the robot's controller and software, keeping the operator at a distance from the atmosphere being measured.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.