This is the protective stand for the Unitree H2: a mobile crane on lockable castor wheels, with a column, a lifting arm worked by a hand-cranked winch and a suspension hook. A lanyard runs through the suspension latches on both of the H2's shoulders and onto the hook, so the 182 cm, 70 kg humanoid hangs with its feet clear of the ground.

The stand is part of the H2's everyday routine. The robot is lifted out of its packaging case with it, powered on while suspended, and released from the hook only once it is standing steadily. Before shutdown it goes back on the stand, because a humanoid that loses power while standing falls; the same applies to a forced shutdown and to long standby in damping mode. During motion, a tether or the stand is recommended wherever possible to guard against falls.

Every H2 is delivered with one stand. A second one is for a lab with more than one H2, a second work area or test track, or a replacement, so the robot is never started or parked without one.

Rated load, lifting height, footprint and shipping weight, and whether a suspension lanyard is included, are confirmed at quote.

Key Capabilities

• Mobile crane for the H2: A castor-mounted lifting frame with winch, arm and hook, made for the 182 cm humanoid.
• Suspended power-on: Holds the robot with its feet off the ground while it starts up and enters its ready state.
• Safe shutdown and standby: The H2 is re-suspended before power-off and for long standby, so it cannot fall when its joints lose power.
• Unboxing and handling: Lifts the H2 out of its lying-posture packaging case on the shoulder lanyard.
• Lockable castors: The base wheels lock before use and let the stand roll between work areas.
• A second stand for labs: Each H2 ships with one; an extra stand serves a second robot, area or test track.

Buying through Robotix Market

This unit is sourced new through established distribution channels and ships worldwide with the full manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.