This is the 43.2 V, 5 Ah lithium pack that powers the Genisom L1 quadruped family, sold as a second or replacement main battery. GENISOM lists 1 to 2 hours of endurance for the L1 on one pack and about an hour to recharge it, so a single battery turns every session into a cycle of work, stop and wait.
A second pack removes the wait. One charges while the other is in the robot, and the gap between runs shrinks to the time it takes to change packs. Two or three packs rotating through a charger keep an L1 available for most of a lab day or a full exhibition day.
The pack is a ternary lithium (NCM) design rated for 500 cycles with at least 60 per cent of its capacity retained, so a programme running the robot daily should plan for replacement packs over time. At 43.2 V and 5 Ah it holds roughly 216 Wh, which is above the level airlines generally accept in passenger baggage — check your carrier's rules and use approved lithium shipping.
The L1, L1-W and the EDU editions are all listed with the same 43.2 V, 5 Ah battery figures, but the exact pack for your robot is confirmed against your model before the order. The larger industrial M1 uses a different 54 V pack and is not interchangeable with this one.
Key Capabilities
-
43.2 V, 5 Ah pack: The main battery of the Genisom L1 quadruped family, with a rated capacity of 4.6 Ah and roughly 216 Wh of nominal energy.
-
About an hour to charge: GENISOM lists about one hour of charging time, measured at 25 °C ambient.
-
Turns runtime into a rotation: With a spare pack, one charges while the other works, so the robot waits only for a pack change.
-
500-cycle rated life: The cell is rated for 500 cycles with at least 60 per cent of capacity retained, which is what heavy users should budget against.
-
1.7 kg, 20 × 12 × 10 cm: Light enough to carry two or three in a field kit for test sites without mains power.
-
Fitment confirmed before order: The L1, L1-W and EDU editions share the same battery figures, and we confirm the pack against your exact model.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.