The CR3AS is Dobot's 3 kg, 620 mm collaborative arm fitted with SafeSkin, a soft sensing cover on the outer joints that notices a hand or arm before it touches the robot and stops the motion. It is the arm for workstations where operators reach in all day to load parts, swap trays or adjust a fixture, and where a stop after contact is not good enough.
It is a different product from the standard Dobot CR3A, which we also sell. Both share the same arm: 3 kg payload, 620 mm working radius, ±0.02 mm repeatability and 16.5 kg of weight. The CR3AS adds SafeSkin on joints J4, J5 and J6, which senses proximity and contact 5 to 15 cm out depending on its position, with a 0.01 s sensing cycle and an emergency stop executed within 0.1 s. The CR3A relies on contact-based collision detection, so where nobody works right beside the robot it covers the same envelope without the skin.
Five of the six joints turn ±360° and J3 turns ±155°, the maximum reach is 795 mm and the tool centre point moves at up to 2 m/s. The arm runs at 48 V DC and draws 120 W. At the flange there are two digital inputs, two digital outputs and two analogue inputs with RS485; the controller offers 16 DI, 16 DO/DI, 2 AI/AO and an ABZ incremental encoder input, with TCP/IP, Modbus and Wi-Fi.
SafeSkin adds a layer of protection but does not replace the risk assessment of the complete cell. Sharp or hot tools at the flange still need their own safeguards, and gripper, sensor and part together must stay within 3 kg.
Key Capabilities
-
Stops before contact: SafeSkin senses a person or object approaching the outer joints and halts the arm before it is touched, rather than after.
-
Soft cover where people meet the arm: The skin is a cushioned silicone wrap, so it softens contact on the joints people are most likely to brush against, even with the robot powered off.
-
Same 3 kg arm as the CR3A: Payload, 620 mm working radius, ±0.02 mm repeatability and 16.5 kg weight match the standard CR3A, and SafeSkin is the difference.
-
Fast reaction: SafeSkin samples every 0.01 s and the emergency stop executes within 0.1 s.
-
Small footprint: At 16.5 kg with a 620 mm working radius, it fits on benches, carts and compact cells where a larger cobot would not.
-
Hand-guided teaching: DobotStudio Pro offers graphical programming and scripting, and positions can be taught by moving the arm by hand.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.