Not every pallet is built to the ceiling. Many lines ship pallets of 1.2 to 1.7 metres, and for those a moving lift column is an extra part to buy and maintain. The Dobot CR20A Columnar Palletizing Workstation (part number 1300000618, configuration HSM) keeps it simple: the CR20A collaborative robot sits on a fixed 1,150 mm column, at the right height to build pallets up to 1,740 mm.
From that fixed position the robot reaches across the pallet with its 1,700 mm working radius and handles cases up to 20 kg including the gripper. It keeps the same pace as the lifting version: about 9 cases a minute with a single suction gripper and about 13 when picking two cases at once.
The all-in-one base carries the electrical control and communication, quick-connect terminals for control signals and reserved I/O for safety devices such as light curtains or area scanners. A pallet detection and positioning device tells the robot when a pallet is in place and where to build, and reserved forklift positions let the whole workstation move when lines change. Patterns are set up in Dobot's palletizing process package from case size, pallet size and pattern in about 30 minutes.
The footprint is 1,350 × 2,220 mm and the power supply 100 to 240 V AC, 50/60 Hz, 16 A. The robot arm is rated IP54 and the workstation IP20, so site it in a dry area. The CR20A and the gripper are quoted separately. For pallets taller than 1,740 mm, the CR20A Lifting Palletizing Workstation reaches 2,100 mm.
Key Capabilities
-
Fixed 1,150 mm column: With no lift axis to drive or service, the cell is simpler and has fewer moving parts.
-
Pallets up to 1,740 mm: From its fixed height the CR20A stacks to 1,740 mm, enough for most standard shipping pallets.
-
Same pace as the lifting version: About 9 cases a minute with single suction and about 13 with double suction.
-
Pallet detection and positioning: A detection device tells the robot when a pallet is in place and where to start building.
-
Reserved safety I/O: Quick-connect terminals and reserved I/O accept light curtains, area scanners and other safety devices.
-
Forklift-ready base: Reserved forklift positions let the whole workstation be relocated when lines change.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation. On-site installation is not included in the product price.