Daily average price
Amounts in USD







Key Features
Max Payload
Max Force
Stroke
Weight
Repeat Accuracy
Full-Load Durability
Fingertip Tactile
Communication
Key Features
Max Payload
Max Force
Stroke
Weight
Repeat Accuracy
Full-Load Durability
Fingertip Tactile
Communication
The AGILINK OmniPicker 3 is an industrial two-finger gripper — 140 N of grip force, a 110 mm stroke, ±0.1 mm repeatability and fingertip tactile sensing, all under 800 g. For repetitive pick-and-place it outlasts and outperforms a dexterous hand at a fraction of the cost.
Compatible with:
The AGILINK OmniPicker 3 is the gripper you reach for when the job is pick, place and hold — reliably, millions of times, without the cost or the control complexity of a five-finger hand. It is AGILINK’s industrial end effector: one moving pair of fingers, 140 N of force, a 110 mm stroke and ±0.1 mm repeatability.
It carries 3 kg rated and 5 kg maximum payload, opens and closes a 60 mm move in 0.4 seconds, and weighs under 800 g — light enough that it barely eats into the arm payload it is mounted on. Fingertip tactile sensing is built in, so the gripper knows when it has made contact rather than inferring it from motor current.
It speaks CANFD and RS485, ships with a Python and C++ SDK, and runs under ROS 2. Mount it on a mainstream industrial arm, on an AGIBOT humanoid, or on a UMI data-collection rig — the same unit, the same interface.
Built for Cycle Count. This is an industrial gripper, specified for continuous duty rather than demonstration. If the task is repetitive pick-and-place, a two-finger gripper outlives and outperforms a dexterous hand at a fraction of the price.
Force You Can Actually Use. 140 N of grip force across a 110 ± 5 mm stroke, with 3 kg rated and 5 kg maximum payload. Enough range to handle a tote, a bottle, a tray and a machined part without a tool change.
It Knows When It Has Touched Something. Fingertip tactile sensing at the contact surface — not motor-current estimation — so grip detection and slip response happen at the finger, where they should.
Under 800 g. Light enough to leave the host arm’s payload budget almost intact. On a 5 kg arm that difference decides what you can actually lift.
Open Software, Standard Buses. CANFD and RS485, a Python and C++ SDK and ROS 2 support. Compatible with mainstream arms, UMI rigs and the AGIBOT humanoid range.
AGILINK is AGIBOT’s dexterous manipulation arm. It reports 20,000+ end effectors shipped, the No.1 global market share in dexterous hands for Q1 2026, and 50,000+ hours of real-world manipulation data behind its control stack. Every hand and gripper in the AGILINK range ships with a Python and C++ SDK and runs under ROS 2.
When the task needs fingers rather than jaws, AGILINK makes three dexterous hands: the compact OmniHand 3 Lite-S (11 DOF, 350 g), the general-purpose OmniHand 3 (16 DOF, 1D tactile) and the flagship OmniHand 3 Ultra (Tactile) (21 active DOF, full-hand tactile sensing).
Specifications subject to change. All figures reflect AGIBOT manufacturer data current as of November 2026. For the most current information, custom configurations or volume pricing, contact .

AGILINK OmniPicker 3 Gripper
Max gripping force
Stroke
Full-load durability
140 N across a 120 mm stroke, with a 5 kg maximum payload and adaptive force control.
±0.1 mm repeatability.
Fingertip tactile sensing at 0.1 N, with an optional depth or fisheye camera.
Rated for one million full-load cycles.
Every AGIBOT X2, A3 and G2 variant, plus mainstream arms. One OmniPicker is also included in the G2 package.
Place Your Order
Order directly through our website or use the form below to connect with a product expert first. Delivery timelines depend on model availability, but we ship as quickly as possible — and we’ll keep you updated every step of the way.
Setup & Configuration
Every robot is different. Depending on your selected model and accessories, configuration can be plug-and-play or require a tailored setup. We offer optional demos, consultations, and ongoing support to ensure you’re up and running with confidence.
Get Up and GO
Once set up, your robot is ready to roll. Preloaded actions make it easy to get started, while manual controls and custom routines let you push the limits of what’s possible.
Price history
One data point per day, averaged by observation date.
Amounts in USD
Averages are computed per UTC day from every recorded offer price.

Agibot · Paris, FR
$999

Agibot · Paris, FR
$899

Agibot · Eindhoven, NL
from 1,590 zł

Agibot · Paris, FR
$7,499

Agibot · Paris, FR
$9,999

Agibot · Shanghai, CN
from $6,300

Agibot · Eindhoven, NL
2,900 zł

Agibot · Eindhoven, NL
29,900 zł

Agibot · Eindhoven, NL
5,900 zł

Agibot · Eindhoven, NL
5,900 zł

Agibot · Paris, FR
$2,750

Genisom · Barcelona, ES
$949
🍪 Cookie preferences
We use cookies to measure performance. Privacy Policy