ROBOTIS BT-210 Set

FEATURES The BT-210 is a product that uses Bluetooth communication to enable serial communication(UART). The BT-210 covers the circuit with a case to protect it, and it uses a connector-type cable to install on a robot and RC-100B. You can control your robot without any problems even when the infrared control condition is not optimal such as in a robot competition. The SLAVE module can be used when controlling the robot from a device that supports Bluetooth communication such as a smartphone, tablet PC or notebook. CAUTION The MASTER module and the SLAVE module are divided – MASTER module for the transmitter; SLAVE module for the robot. When first released and purchased, the two modules are paired so there is no need for a separate ID setting procedure. If either of the components is lost, you will have to purchase the BT-210 (Product code 902-0076-000) for pairing. Directions for pairing can be found in our E-manual. Click to refer to directions for pairing. The initial Pin Code when released from factory is 0000. Use this when connecting to the Bluetooth device(SLAVE). When a change is needed, please refer to the link above. However, OpenCM-9.04 or A C-type controller is required. INCLUDED COMPONENTS Wireless Communication Module BT-210 (120mm cable included) QTY: 2 SPECIFICATIONS Weight 4.51g Dimensions 18mm x 30mm x 9.1mm Bluetooth Specification Bluetooth Specification 2.1 Support Effective Communication Distance 10 M(Class 2) Frequency Range 2.4 GHz ISM Band Bandwidth MAX 250kbps Basic Transmission Speed 57600bps Sensitivity -81dBm (Typical) Transmit Power 4dBm(Typical) Bluetooth Profile Support SPP (Serial Port Profile) Working Voltage 3.3V Electric Current Used 48mA (Max) Working Temperature -40℃ ~ 85℃ Transmission Speed 1,200bps – 400,000bps Antenna Chip Antenna Interface UART (3.3V Level) INSTALLATION TO PRODUCTS Controller : CM-100A, CM-530 -> Wireless control, wireless download possible CM-510, CM-700, CM-900 -> Wireless control possible (firmware update required) Remote Control : RC-100B (Please refer to comparison table below) CAUTION Installation not supported -Remote Control : RC-100, RC-100A - Controller : CM-100, CM-5, CM-2+ [Link to e-manual]