The Dobot Linear Rail carries a whole Magician or Magician Lite arm along a one-metre track. In industry this is called a seventh axis or track; on a desktop arm it turns one robot into a long workstation that can reach both ends of a bench, several fixtures or the two ends of a conveyor.
Dobot sells it as the Sliding Rail Kit for the Magician family. A high-precision industrial linear guide carries the arm over 1000 mm of effective travel and is rated for a 5 kg payload, which covers the arm and its tool. It returns to a taught position within 0.01 mm, with 0.25 mm absolute positioning accuracy, and a drag chain carrier guides the robot's cables as it travels.
The rail moves at up to 150 mm/s with 150 mm/s² acceleration, so a full one-metre move takes several seconds. That suits teaching and light pick-and-place between stations, large-format drawing with the pen holder and wider laser engraving rather than fast cycle work. Allow at least 1320 × 120 mm of bench for the rail itself, plus room for the arm's reach on both sides.
Rail moves are programmed in Dobot software together with the arm, so both sit in one program. The MG400 uses its own sliding rail kit, and the robot arm is not included with this one.
Key Capabilities
-
One Extra Metre of Travel: The rail adds 1000 mm of travel to the arm's own reach.
-
Industrial Linear Guide: A high-precision linear rail carries the arm for smooth, steady motion along its full length.
-
0.01 mm Repeat Positioning: Taught points along the track repeat within 0.01 mm, with 0.25 mm absolute accuracy.
-
5 kg Payload: The rating covers a Magician or Magician Lite together with its end tool.
-
Drag Chain Cabling: A cable carrier guides and protects the robot's wiring as it moves.
-
One Program for Arm and Rail: Rail moves are planned in Dobot software alongside the arm, in block programming or code.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope and configuration are agreed before dispatch, and on-site installation is not included in the product price.