Robotis - LIPO 11.1V Battery Set LB-010

Description: This Li-Po battery is intended for the Bioloid Premium Kit. It has PCM embedded to protect from over charge, over discharge, and excess current. Includes: LIPO 11.1V Battery Set LBS-10 : 1 pc Battery Cover : 1 spc F60 : 1 pc CABLE-BAT : 1 pc Specifications: Voltage : 11.1V Capacity : 1000 mAh Discharge : 10C Dimension : 70 x 35 x 15 Weight : 83g PCM embedded to protect from over charge, over discharge, and excess current. Storage Precautions Do NOT charge the battery when the battery is connected to the robot or charger. When storing away the battery for a long time, make sure the battery life is somewhere around 50%. Do not place batteries in a place exposed to direct sunlight (between 0~45 degrees). Do not store batteries with metal objects such as coins, keys, or jewelry. Do not drop or give impact. Do not apply water or any other liquid on the battery. ※ The warranty of LIPO 11.1V Battery Set LBS-10 is 6 months. Caution! Not be charged through the robot, must be charged through the dedicated charger (LBC-10). Do not drop the battery or shock it. Do not operate the product during charging. Do not heat the rechargeable battery or contact with fire, water, and other liquids. Do not place the battery in a microwave oven, washing machine or dryer. Damaged rechargeable batteries should not be used. (Swelling, deformed, damaged appearance, etc.) Do not short-circuit the rechargeable battery anode and cathode. Do not disassemble the rechargeable battery. Before charging the rechargeable battery, make sure it is connected to the correct polarity and charge it. Do not charge the rechargeable battery when it is hot. Do not connect the rechargeable battery to the controller when not using the rechargeable battery. Do not charge the rechargeable battery while it is connected to the controller. Compatible Products: Controller : CM-510, CM-530, CM-700 Charger : LIPO Battery Charger LBC-10